AT2022 X/Y Stereo Microphone


    Ships Directly from Manufacturer. Contact Us for Availability.

    The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.


    • X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
    • Provides the spatial impact and realism of a live sound field
    • Battery operation allows use with most recording devices
    • Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
    • User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
    • Ideal for general stereo recording and field sound capture
    • Excellent channel separation
    • Included fuzzy windscreen offers excellent wind protection

    Elements: Fixed-charge back plate, permanently polarized condenser
    Polar Pattern: X/Y Stereo
    Frequency Response: 20–20,000 Hz
    Low Frequency Roll-off: 150 Hz, 6 dB/octave
    Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa
    Channel Balance: <2.5 dB
    Impedance: 200 ohms
    Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range (Typical): 103 dB, 1 kHz at Max SPL
    Signal-to-Noise Ratio: 75 dB, 1 kHz at 1 Pa
    Battery Type: 1.5V AA/UM3
    Warning:: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
    Battery Current/Life: 1.2 mA / 500 hours typical (alkaline)
    Switch: Off, on/flat, on/roll-off
    Weight: 270 g (9.5 oz)
    Dimensions: 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter
    Output Connector: Integral 3-pin XLRM-type
    Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
    Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch
    More Information
    Manufacturer Model NumberAT2022
    Manufacturer Part NumberAT2022
    Write Your Own Review
    You're reviewing:AT2022 X/Y Stereo Microphone