BSSBLUHYBRIDIN-M Soundweb London Telephone Hybrid Card

SKU
SP86764

Ships Directly from Manufacturer. Contact Us for Availability.

$535.00
Overview
The Soundweb London Telephone Hybrid Cards are designed to populate any of the four card slots on Soundweb London BLU-800, BLU-320, BLU-160 and BLU-120 devices. These cards enable Soundweb London devices to interface with a standard POTS (aka PSTN or Analog PBX) telephone network.

The Soundweb London Telephone Hybrid Cards also have two analog inputs which allow each Telephone Hybrid Card to receive two microphone or line level signals. These analog inputs offer Phantom Power, configurable per channel and software controlled analog gain in 6 dB steps from 0 dB to 48 dB.

The Telephone Hybrid Cards each have two Combicon connectors which are used as follows:

TELEPHONE HYBRID CARD:
Connector 1
Balanced / Unbalanced Audio, Channel 1 - Mic/Line
Balanced / Unbalanced Audio, Channel 2 - Mic/Line

Balanced Unbalanced
Connector 2
Tip / Ring, Telephone Line Connection
Tip / Ring, Parallel Set Connection

TELECOM AND SAFETY INFORMATION:
**WARNING**
Connection to telephone system involves high voltages. This device must be installed by qualified personnel.
Connections to the telephone network must be made with #26 AWG solid copper wire to meet UL 60950.

NOTE: the Telecommunications Act is administered by the ACTA in the USA. The ACA is the authority in Australia.
Industry Canada is the authority in Canada.

TELECOM
USA/Canada: P68 (TIA-968-B) /CS-03
European: CE
Australia: ACA AS/ACIF S002: 2005

SAFETY
IEC / UL 60950
IEC / UL 60065 + AMD1

File(s)

SPECIFICATIONS:

Analog Inputs: 2 electronically balanced on Phoenix/Combicon removable screw connectors
Mic/Line Inputs: Nominal gain 0 dB, electronically switchable up to +48 dB,in +6 dB steps
Input Impedance: 3.5kO
Maximum Input Level: +20 dBu with 0 dB input gain,+8 dBu with 12 dB gain, balanced, 150O
CMRR: >75 dB at 100 Hz, >66 dB at 1 kHz
Input Noise (E.I.N.): <-128 dBu typical with 150O source, 20 kHz, +48 dB gain
Phantom Power: 48V nominal, selectable per input
A/D Latency: 12/Fs [0.25 ms @ 48 k]
THD+N: <0.005% typical (20 Hz to 20 kHz @ +10 dBu), balanced, 150O
Frequency Response: 20 Hz to 20 kHz +/-0.2 dB, balanced, 150O
Dynamic Range: 117 dB, 20 Hz to 20 kHz, A-weighted: 114 dB unweighted
Telephone Interface:
AC-REN: 0.0B
Dynamic Range: 67 dB
Frequency Response: 300 to 3.3 kHz
THD: <0.3%
Transhybrid Loss: >48 dB with LEC enabled
LEC Tail Time: 64 ms
TX Level: -10 dBm RMS average
RX Level: +3.2 dBm RMS
More Information
Weight 0.500000
Length 10
Width 6.5
Height 4
Manufacturer BSS by HARMAN
Manufacturer Model Number BSSBLUHYBRIDIN-M
Manufacturer Part Number BSSBLUHYBRIDIN-M
UPC 691991013881
Write Your Own Review
You're reviewing:BSSBLUHYBRIDIN-M Soundweb London Telephone Hybrid Card