U851RWB Cardioid Condenser Boundary Microphone
$239.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP87107
The phantom-powered U851RWb cardioid condenser boundary microphone offers outstanding speech intelligibility and transparent sound quality for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations. The microphone is equipped with a PivotPoint rotating output connector, UniSteep filter and UniGuard RFI-shielding technology. It accepts interchangeable condenser elements, available separately in hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851RWb is equipped with self-contained electronics, eliminating the need for an external power module. Threaded inserts on the bottom of the microphone allow it to be mounted with screws for increased security.
FEATURES
• Cardioid condenser boundary microphone
• Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
• Superior off-axis rejection for maximum gain before feedback
• PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
• Small-diameter UniPoint element near boundary eliminates phase distortion and delivers clear, high-output performance
• Available interchangeable elements permit angle of acceptance from 100° to 360°
• UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Self-contained electronics eliminate need for external power module
• Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
• Low-profile design with low-reflectance finish for minimum visibility
• Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security
• Available in two colors: white (U851RWb) and black (U851Rb)
SPECIFICATIONS
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll-off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 108 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa, A-weighted
Phantom Power Requirements: 11-52V DC, 4.4 mA
Switch: Flat, roll-off
Weight: 253 g (8.9 oz)
Dimensions: 0.91" (23.0 mm) H x 3.30" (83.9 mm) W x 4.25" (108.0 mm) D
Output Connector: Microphone: TB3M-type, Cable: 3-pin XLRM-type
Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
Optional Interchangeable Elements: UE-H hypercardioid (100°), UE-O omnidirectional (360°)
Accessory Furnished: Soft protective pouch
• Cardioid condenser boundary microphone
• Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
• Superior off-axis rejection for maximum gain before feedback
• PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
• Small-diameter UniPoint element near boundary eliminates phase distortion and delivers clear, high-output performance
• Available interchangeable elements permit angle of acceptance from 100° to 360°
• UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Self-contained electronics eliminate need for external power module
• Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
• Low-profile design with low-reflectance finish for minimum visibility
• Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security
• Available in two colors: white (U851RWb) and black (U851Rb)
SPECIFICATIONS
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll-off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 108 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa, A-weighted
Phantom Power Requirements: 11-52V DC, 4.4 mA
Switch: Flat, roll-off
Weight: 253 g (8.9 oz)
Dimensions: 0.91" (23.0 mm) H x 3.30" (83.9 mm) W x 4.25" (108.0 mm) D
Output Connector: Microphone: TB3M-type, Cable: 3-pin XLRM-type
Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
Optional Interchangeable Elements: UE-H hypercardioid (100°), UE-O omnidirectional (360°)
Accessory Furnished: Soft protective pouch
| Weight | 1.310000 |
|---|---|
| Length | 5.28 |
| Width | 10.28 |
| Height | 2.76 |
| Color | White |
| Manufacturer | Audio-Technica |
| Manufacturer Model Number | U851RWB |
| Manufacturer Part Number | U851RWB |
| UPC | 4961310146696 |
Write Your Own Review