ATW-3211N831DE2 3000 Series (Fourth Generation) Frequency-Agile True Diversity UHF Wireless Systems - Lavalier Microphone System
$749.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP95476
ATW-R3210N network-enabled receiver and ATW-T3201 body-pack transmitter with AT831cH cardioid condenser lavalier microphone. Includes AT8631 joining plate. Frequency Band: DE2.
The Audio-Technica fourth-generation 3000 Series wireless systems give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range, which is more than twice that offered by the previous 3000 Series models. Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets you set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference.
Available system configurations feature an ATW-R3210 receiver or an ATW-R3210N network-enabled receiver along with an ATW-T3201 body-pack or ATW-T3202 handheld transmitter. The ATW-T3201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T's cH-style lavalier and headworn microphones, or cables. The ATW-T3202 comes with either an ATW-C510 dynamic or ATW-C710 condenser interchangeable cardioid capsule, and its industry-standard thread allows for the use of four additional Audio-Technica’s capsules, plus other compatible capsules. Both transmitters feature rugged, metal housings and are powered by two AA batteries. Charging terminals on each transmitter work with the ATW-CHG3 and ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries.
3000 Series network-enabled systems offer the same features and configurations as the standard systems along with network monitoring and control via Audio-Technica’s Wireless Manager software. Each network-enabled receiver also comes with an AT8631 joining plate.
The Audio-Technica fourth-generation 3000 Series wireless systems give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range, which is more than twice that offered by the previous 3000 Series models. Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets you set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference.
Available system configurations feature an ATW-R3210 receiver or an ATW-R3210N network-enabled receiver along with an ATW-T3201 body-pack or ATW-T3202 handheld transmitter. The ATW-T3201 is equipped with Audio-Technica’s new rugged cH-style screw-down 4-pin connector for secure connection to A-T's cH-style lavalier and headworn microphones, or cables. The ATW-T3202 comes with either an ATW-C510 dynamic or ATW-C710 condenser interchangeable cardioid capsule, and its industry-standard thread allows for the use of four additional Audio-Technica’s capsules, plus other compatible capsules. Both transmitters feature rugged, metal housings and are powered by two AA batteries. Charging terminals on each transmitter work with the ATW-CHG3 and ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries.
3000 Series network-enabled systems offer the same features and configurations as the standard systems along with network monitoring and control via Audio-Technica’s Wireless Manager software. Each network-enabled receiver also comes with an AT8631 joining plate.
FEATURES
• Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in two frequency bands: DE2 (470–530 MHz) and EE1 (530–590 MHz)
• Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
• Network-enabled system, featuring the ATW-R3210N receiver, offers network monitoring and control via Wireless Manager software
• True Diversity operation reduces dropouts
• Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
• Frequency scan and IR sync functionality for ease of setup
• Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
• Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
• Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable Audio-Technica’s microphone capsules, as well as other compatible capsules
• New rugged cH-style connector on body-pack transmitter provides secure connection to lavalier microphones, headworn microphones, and cables with cH-style screw-down 4-pin connector
• Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible
• Charging terminals on transmitters work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries
• Antenna power available for powered antennas and other in-line RF devices
• Ground-lift switch helps eliminate audible hum caused by ground loops
• Balanced and unbalanced audio output jacks
OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies: Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%), ATW-T3202: ±36 kHz (THD:10%)
Dynamic Range: ATW-T3201 Mic input: > 115 dB (A-weighted), typical, ATW-T3201 Inst input: > 112dB (A-weighted), typical
ATW-T3202: > 115 dB (A-weighted), typical
Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Range: 100 m (328') Open range environment with no interfering signals.
Operating Temperature Range: -5° C to +45° C (23° F to 113° F)
Frequency Response: ATW-T3201: 31 Hz to 15,500 Hz ATW-T3202: 25 Hz to 16,700 Hz Frequency response depends on attached microphone element
Maximum Simultaneous Use (Recommended): 40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representative. *Region and band dependent
RECEIVER SPECIFICATIONS
Receiving System: True Diversity
Image Rejection: 60 dB nominal
RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
Antenna Power: 12 V DC, 160 mA (combined)
Maximum Output Level: XLR, balanced: +14 dB, 6.3 mm (1/4"), unbalanced: +8 dBV
Antenna Input BNC-type, 50 ohms
Power Supply 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x D x H) 8.27" x 7.52" x 1.71" (W x D x H)
Net Weight: 1100 g (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount Adapters; AT8631 joining plate (ATW-R3210N only)
BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following Federal and National Regulations
Input Connections: cH-style screw-down 4-pin connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +5V
High-pass (low-freq. roll-off): 125 Hz, 12 dB/octave
Batteries: Two 1.5V AA, not included
Battery Life: High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline), High: 9.0 hours (Ni-MH 1900 mAh), Low: 9.5 hours (Ni-MH 1900 mAh) , Depending on battery type, usage, and environmental conditions.
Dimensions: 64 mm x 82 mm x 23 mm (W x D x H)
2.52" x 3.22" x 0.91" (W x D x H)
Net Weight: 102 g (3.6 oz), without batteries
HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions Following Federal and National Regulations
Microphone Capsule Interchangeable industry standard thread
Batteries Two 1.5V AA, not included
Battery Life High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900 mAh), Low: 9.5 hours (Ni-MH 1900 mAh)
Depending on battery type, usage, and environmental conditions. ATW-R3210N network-enabled receiver and ATW-T3201 body-pack transmitter with AT831cH cardioid condenser lavalier microphone. Includes AT8631 joining plate.
• Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in two frequency bands: DE2 (470–530 MHz) and EE1 (530–590 MHz)
• Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
• Network-enabled system, featuring the ATW-R3210N receiver, offers network monitoring and control via Wireless Manager software
• True Diversity operation reduces dropouts
• Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
• Frequency scan and IR sync functionality for ease of setup
• Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
• Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
• Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable Audio-Technica’s microphone capsules, as well as other compatible capsules
• New rugged cH-style connector on body-pack transmitter provides secure connection to lavalier microphones, headworn microphones, and cables with cH-style screw-down 4-pin connector
• Body-pack transmitter features tactile mute toggle switch (defeatable) for physical confirmation of mute status when transmitter display is not visible
• Charging terminals on transmitters work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries
• Antenna power available for powered antennas and other in-line RF devices
• Ground-lift switch helps eliminate audible hum caused by ground loops
• Balanced and unbalanced audio output jacks
OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies: Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%), ATW-T3202: ±36 kHz (THD:10%)
Dynamic Range: ATW-T3201 Mic input: > 115 dB (A-weighted), typical, ATW-T3201 Inst input: > 112dB (A-weighted), typical
ATW-T3202: > 115 dB (A-weighted), typical
Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Range: 100 m (328') Open range environment with no interfering signals.
Operating Temperature Range: -5° C to +45° C (23° F to 113° F)
Frequency Response: ATW-T3201: 31 Hz to 15,500 Hz ATW-T3202: 25 Hz to 16,700 Hz Frequency response depends on attached microphone element
Maximum Simultaneous Use (Recommended): 40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representative. *Region and band dependent
RECEIVER SPECIFICATIONS
Receiving System: True Diversity
Image Rejection: 60 dB nominal
RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
Antenna Power: 12 V DC, 160 mA (combined)
Maximum Output Level: XLR, balanced: +14 dB, 6.3 mm (1/4"), unbalanced: +8 dBV
Antenna Input BNC-type, 50 ohms
Power Supply 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x D x H) 8.27" x 7.52" x 1.71" (W x D x H)
Net Weight: 1100 g (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount Adapters; AT8631 joining plate (ATW-R3210N only)
BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following Federal and National Regulations
Input Connections: cH-style screw-down 4-pin connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +5V
High-pass (low-freq. roll-off): 125 Hz, 12 dB/octave
Batteries: Two 1.5V AA, not included
Battery Life: High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline), High: 9.0 hours (Ni-MH 1900 mAh), Low: 9.5 hours (Ni-MH 1900 mAh) , Depending on battery type, usage, and environmental conditions.
Dimensions: 64 mm x 82 mm x 23 mm (W x D x H)
2.52" x 3.22" x 0.91" (W x D x H)
Net Weight: 102 g (3.6 oz), without batteries
HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions Following Federal and National Regulations
Microphone Capsule Interchangeable industry standard thread
Batteries Two 1.5V AA, not included
Battery Life High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900 mAh), Low: 9.5 hours (Ni-MH 1900 mAh)
Depending on battery type, usage, and environmental conditions. ATW-R3210N network-enabled receiver and ATW-T3201 body-pack transmitter with AT831cH cardioid condenser lavalier microphone. Includes AT8631 joining plate.
| Weight | 5.420000 |
|---|---|
| Length | 14.96 |
| Width | 13.39 |
| Height | 2.95 |
| Color | Black |
| Manufacturer | Audio-Technica |
| Manufacturer Model Number | ATW-3211N831DE2 |
| Manufacturer Part Number | ATW-3211N831DE2 |
| UPC | 42005206421 |
| Size | Frequency Band: DE2 |
Write Your Own Review