1261m ZonePRO 12x6 Digital Zone Processor
$1,119.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP101408
The ZonePRO 1261m offers fixed I/O, preconfigured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled
microphone gain allows adjustment of microphone gain per channel.
The 1261m device has a preconfigured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 1261m.
FEATURES
• 12 Inputs / 6 Outputs
• 6 Balanced Mic/Line Inputs
• 4 Unbalanced, Mono-Summed RCA Input Pairs
• S/PDIF Input
• Microphone Gain per Channel
• Preconfigured Architecture
• Two Configurable Input Insert Positions
• One Configurable Output Insert Position
• AutoWarmth per Output Zone
• Link Bus
• Optional ZC Controllers
• Ethernet Control
• Serial Control
• Third Party Control
• Wizard-Driven Configuration
The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled
microphone gain allows adjustment of microphone gain per channel.
The 1261m device has a preconfigured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 1261m.
FEATURES
• 12 Inputs / 6 Outputs
• 6 Balanced Mic/Line Inputs
• 4 Unbalanced, Mono-Summed RCA Input Pairs
• S/PDIF Input
• Microphone Gain per Channel
• Preconfigured Architecture
• Two Configurable Input Insert Positions
• One Configurable Output Insert Position
• AutoWarmth per Output Zone
• Link Bus
• Optional ZC Controllers
• Ethernet Control
• Serial Control
• Third Party Control
• Wizard-Driven Configuration
SPECIFICATIONS
Input 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input
Input Type Euroblock (Mic/Line), RCA (Source)
Input Impedance Euroblock: >50 kO Balanced, >25 kO Unbalanced, RF Filtered; RCA: >25 kO Unbalanced, RF Filtered
Max Input +20 dBu Mic/Line, +12 dBu RCA
CMRR > 40 dB, typically >55 db @ 1 kHz
Mic Preamp gain 30 to 60 dB
Mic Preamp Equivalent Input Noise (EIN) < -118 dBu, 22 Hz - 22 kHz, 150O Source Impedance
Mic Preamp Phantom Power 15V
Output 6 Total
Output Type Electronically Balanced, RF Filtered Euroblock
Output Impedance 120O Balanced, 60O Unbalanced
Max Output +20 dBu
A/D Converter dbx Type IV Conversion System
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range >119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
Sample Rate 48 kHz
D/A Dynamic Range 112 dB A-weighted, 109 dB unweighted, 22 kHz BW
Dynamic Range >110 dB A-weighted, >107 dB unweighted, 22 kHz BW
THD+Noise 0.003% typical at +4 dBu, 1 kHz, 0 dB gain
Frequency Response 20 Hz – 20 kHz, +/- 0.5 dB
Interchannel Crosstalk >80 dB typical
Propagation Delay 0.8 msec
Operating Voltage 100-240 VAC, 50/60 Hz
Power Consumption 27 W
BTU <92.13
Unit Weight 6.2 lb. / 2.81 kg
Shipping Weight 8.35 lb. / 3.78 kg
Dimensions 1.75” (1U) x 19” x 7.75” (45 mm x 483 mm x 197 mm)
Safety Agency Certifications UL 60065, IEC 60065, E 60065, EN 55013
Input 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input
Input Type Euroblock (Mic/Line), RCA (Source)
Input Impedance Euroblock: >50 kO Balanced, >25 kO Unbalanced, RF Filtered; RCA: >25 kO Unbalanced, RF Filtered
Max Input +20 dBu Mic/Line, +12 dBu RCA
CMRR > 40 dB, typically >55 db @ 1 kHz
Mic Preamp gain 30 to 60 dB
Mic Preamp Equivalent Input Noise (EIN) < -118 dBu, 22 Hz - 22 kHz, 150O Source Impedance
Mic Preamp Phantom Power 15V
Output 6 Total
Output Type Electronically Balanced, RF Filtered Euroblock
Output Impedance 120O Balanced, 60O Unbalanced
Max Output +20 dBu
A/D Converter dbx Type IV Conversion System
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range >119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
Sample Rate 48 kHz
D/A Dynamic Range 112 dB A-weighted, 109 dB unweighted, 22 kHz BW
Dynamic Range >110 dB A-weighted, >107 dB unweighted, 22 kHz BW
THD+Noise 0.003% typical at +4 dBu, 1 kHz, 0 dB gain
Frequency Response 20 Hz – 20 kHz, +/- 0.5 dB
Interchannel Crosstalk >80 dB typical
Propagation Delay 0.8 msec
Operating Voltage 100-240 VAC, 50/60 Hz
Power Consumption 27 W
BTU <92.13
Unit Weight 6.2 lb. / 2.81 kg
Shipping Weight 8.35 lb. / 3.78 kg
Dimensions 1.75” (1U) x 19” x 7.75” (45 mm x 483 mm x 197 mm)
Safety Agency Certifications UL 60065, IEC 60065, E 60065, EN 55013
| Weight | 9.000000 |
|---|---|
| Length | 22.5 |
| Width | 11.5 |
| Height | 3.5 |
| Color | Black |
| Manufacturer | dbx by HARMAN |
| Manufacturer Model Number | 1261m |
| Manufacturer Part Number | DBX1261MV |
| UPC | 691991401190 |
Write Your Own Review