215s Dual Channel 15-Band Equalizer
$249.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP93534
Exceptional sound and rugged reliability
When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The dbx 215s includes two 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20 mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10 Hz to 50 kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best.
Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.
FEATURES
• Dual 15-band, 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of ±6 or ±12 dB
• Front panel bypass switch
• ±12 dB input gain range
• 4-segment LED ladders for monitoring output levels
• XLR and TRS Inputs and Outputs
• Frequency Response of <10 Hz to >50 kHz
• Dynamic range of greater than 108 dB
When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The dbx 215s includes two 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20 mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10 Hz to 50 kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best.
Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.
FEATURES
• Dual 15-band, 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of ±6 or ±12 dB
• Front panel bypass switch
• ±12 dB input gain range
• 4-segment LED ladders for monitoring output levels
• XLR and TRS Inputs and Outputs
• Frequency Response of <10 Hz to >50 kHz
• Dynamic range of greater than 108 dB
SPECIFICATIONS
Input Connectors 1/4" TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21 dBu balanced or unbalanced
CMRR >40 dB, typically >55 dB at 1 kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21 dBu balanced/unbalanced into 2 kOhm or greater; >+18 dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20 Hz to 20 kHz, +0.5/-1 dB
Frequency Response <10 Hz to >50 kHz, +0.5/-3 dB
Dynamic Range Typically >112 dB
Signal to Noise Ratio Typically >95 dB
THD+Noise <0.003%
Interchannel Crosstalk <-90 db, 20 Hz to 20 kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50 Hz 12 dB/octave Bessel high-pass filter
Range Switch Selects either +/- 6 dB or +/- 12 dB slider boost/cut range
Operating Voltage 100 VAC - 240 VAC 50/60 Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 4.8 lb.(2.2 kg)
Shipping Weight 6.2 lb.(2.8 kg)
Dimensions 1.75" (4.4 cm) H x 6"(15.24 cm) D x 19" (48.26 cm) W
Input Connectors 1/4" TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21 dBu balanced or unbalanced
CMRR >40 dB, typically >55 dB at 1 kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21 dBu balanced/unbalanced into 2 kOhm or greater; >+18 dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20 Hz to 20 kHz, +0.5/-1 dB
Frequency Response <10 Hz to >50 kHz, +0.5/-3 dB
Dynamic Range Typically >112 dB
Signal to Noise Ratio Typically >95 dB
THD+Noise <0.003%
Interchannel Crosstalk <-90 db, 20 Hz to 20 kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50 Hz 12 dB/octave Bessel high-pass filter
Range Switch Selects either +/- 6 dB or +/- 12 dB slider boost/cut range
Operating Voltage 100 VAC - 240 VAC 50/60 Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 4.8 lb.(2.2 kg)
Shipping Weight 6.2 lb.(2.8 kg)
Dimensions 1.75" (4.4 cm) H x 6"(15.24 cm) D x 19" (48.26 cm) W
| Weight | 6.000000 |
|---|---|
| Length | 22 |
| Width | 2.5 |
| Height | 11 |
| Manufacturer | dbx by HARMAN |
| Manufacturer Model Number | 215S |
| Manufacturer Part Number | 215S |
| UPC | 691991401220 |
Write Your Own Review