640m ZonePRO 6x4 Digital Zone Processor
$879.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP71738
The ZonePRO 640m offers fixed I/O, preconfigured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 640m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 640m device has a preconfigured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.
FEATURES
• 6 Inputs / 4 Outputs
• 4 Balanced Mic/Line Inputs
• 2 Unbalanced, Mono-Summed RCA Input Pairs
• Microphone Gain per Channel
• Preconfigured Architecture
• Two Configurable Input Insert Positions
• One Configurable Output Insert Position
• AutoWarmth per Output Zone
• Link Bus
• Comprehensive Signal Metering
• Front Panel LCD
• User-Specified Front Panel Control
• Optional ZC Controllers
• Ethernet Control
• Serial Control
• Third Party Control
• Wizard-Driven Configuration
The 640m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 640m device has a preconfigured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.
FEATURES
• 6 Inputs / 4 Outputs
• 4 Balanced Mic/Line Inputs
• 2 Unbalanced, Mono-Summed RCA Input Pairs
• Microphone Gain per Channel
• Preconfigured Architecture
• Two Configurable Input Insert Positions
• One Configurable Output Insert Position
• AutoWarmth per Output Zone
• Link Bus
• Comprehensive Signal Metering
• Front Panel LCD
• User-Specified Front Panel Control
• Optional ZC Controllers
• Ethernet Control
• Serial Control
• Third Party Control
• Wizard-Driven Configuration
SPECIFICATIONS
Indicators 4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
LCD Display LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
Input 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs
Input Connectors Euroblock (Line and Mic) RCA (Source)
Input Type Electronically balanced/RF-filtered
Input Impedance Euroblock: >50 kO Balanced, >25 kO Unbalanced, RF Filtered; RCA: >25 kO Unbalanced, RF Filtered
Max Input +20 dBu Mic/Line, +12 dBu RCA
CMRR >40 dB, typically >55 dB @ 1 kHz
Mic Preamp gain 30 to 60 dB
Mic Preamp Equivalent Input Noise (EIN) < -118 dBu, 22 Hz - 22 kHz, 150O Source Impedance
Mic Preamp Phantom Power +15 VDC
Output 4 total
Output Connectors Euroblock
Output Type Electronically Balanced, RF Filtered
Output Impedance 120O Balanced, 60O Unbalanced
Max Output +20 dBu
A/D Converter dbx Type IV conversion system
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range >119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
Digital Output Dynamic Range >114 dB A-weighted, 110 dB unweighted
Sample Rate 48 kHz
D/A Dynamic Range 112 dB A-weighted, 109 dB unweighted, 22 kHz BW
Dynamic Range >109 dB A-weighted, >106 dB unweighted, 22 kHz BW
THD+Noise 0.003% typical at +4 dBu, 1 kHz, 0 dB gain
Frequency Response 20 Hz - 20 kHz, +/-0.5 dB
Interchannel Crosstalk >80 dB typical
Propagation Delay 0.6 msec
Operating Voltage 100 VAC 50/60 Hz, 120 VAC 60 Hz and 230 VAC 50/60 Hz
Power Consumption 29 W
BTU <92.13
Unit Weight 6.05 lb. / 2.74 kg
Shipping Weight 8.2 lb. / 4 kg
Dimensions 1.75” (1U) x 19” x 7.75” (45 mm x 483 mm x 197 mm)
Safety Agency Certifications UL 600065, IEC 60065, EN 55013, E60065
Indicators 4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
LCD Display LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
Input 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs
Input Connectors Euroblock (Line and Mic) RCA (Source)
Input Type Electronically balanced/RF-filtered
Input Impedance Euroblock: >50 kO Balanced, >25 kO Unbalanced, RF Filtered; RCA: >25 kO Unbalanced, RF Filtered
Max Input +20 dBu Mic/Line, +12 dBu RCA
CMRR >40 dB, typically >55 dB @ 1 kHz
Mic Preamp gain 30 to 60 dB
Mic Preamp Equivalent Input Noise (EIN) < -118 dBu, 22 Hz - 22 kHz, 150O Source Impedance
Mic Preamp Phantom Power +15 VDC
Output 4 total
Output Connectors Euroblock
Output Type Electronically Balanced, RF Filtered
Output Impedance 120O Balanced, 60O Unbalanced
Max Output +20 dBu
A/D Converter dbx Type IV conversion system
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range >119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
Digital Output Dynamic Range >114 dB A-weighted, 110 dB unweighted
Sample Rate 48 kHz
D/A Dynamic Range 112 dB A-weighted, 109 dB unweighted, 22 kHz BW
Dynamic Range >109 dB A-weighted, >106 dB unweighted, 22 kHz BW
THD+Noise 0.003% typical at +4 dBu, 1 kHz, 0 dB gain
Frequency Response 20 Hz - 20 kHz, +/-0.5 dB
Interchannel Crosstalk >80 dB typical
Propagation Delay 0.6 msec
Operating Voltage 100 VAC 50/60 Hz, 120 VAC 60 Hz and 230 VAC 50/60 Hz
Power Consumption 29 W
BTU <92.13
Unit Weight 6.05 lb. / 2.74 kg
Shipping Weight 8.2 lb. / 4 kg
Dimensions 1.75” (1U) x 19” x 7.75” (45 mm x 483 mm x 197 mm)
Safety Agency Certifications UL 600065, IEC 60065, EN 55013, E60065
| Weight | 8.200000 |
|---|---|
| Length | 7.75 |
| Width | 19 |
| Height | 1.75 |
| Color | Black |
| Manufacturer | dbx by HARMAN |
| Manufacturer Model Number | ZonePRO 640M |
| Manufacturer Part Number | ZonePRO 640M |
| UPC | 691991401169 |
Write Your Own Review