ANI4OUT Audio Network Interface with BLOCK Connector Outputs (Power Supply Not Included)

Converts Dante digital audio signal to four discrete line / mic analog signals.

FEATURES
Single Ethernet port carries Dante audio, power (PoE – class 0)
LEDs indicate device status and audio signal
Control strings for third-party preset controllers including Crestron and AMX
4 Band C/S PEQ on every channel
Provides channel summing to combine Dante signals from the network and send them over a single analog output
Browser-based software control for all device parameters, per output channel - Mute control / Digital gain / Polarity control
1/3 Rack unit wide
Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
Available in block connector and standard XLR variations

Weight (g) / (lb.): 663 g / 1.462 lb.
Height (mm) / (in): 40 mm / 1.575 in
Width (mm) / (in): 140 mm / 5.512 in
Depth (mm) / (in): 128 mm / 5.039 in
Power: PoE
Analog Inputs: n/a
Dante Inputs: 4
Analog Outputs: 4 Mic/Line/Aux with PEQ
Dante Outputs: n/a
DANTE Audio Network Interface: yes
USB Audio: no
Audio Connectors: 3 Pin XLR BLOCK
Ethernet Connector: RJ45 (for Ethernet) ,
Acoustic Echo Cancelation: no
Noise Reduction: no
Automatic Mixing: No (Summing available)
Matrix Mixing: no
DFR: no
Stereo/Mono: Mono