StudioLive 16.0.2 USB 16x2 Performance and Recording Digital Mixer

Computer system requirements:

Below are the minimum computer-system requirements for StudioLive 16.0.2 USB.

macOS
• macOS version 10.13 or later
• 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates)
• Available USB port

Windows
• Windows 10 or later (64-Bit Only)
• 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support)
• Available USB port

The above are the hardware system requirements for this product.?DAW software and Operating System requirements vary.

Technical Specifications

Microphone Preamp:
Type: XLR Female, Balanced
Frequency Response to Direct Output (at unity gain): 20 Hz-20 kHz, 0 / -0.5 dBu
Frequency Response to Main Output (at unity gain): 20 Hz-20 kHz, ±0.5 dBu
Input Impedance (Balanced): 1 kO
THD to Direct Output (1 kHz at unity gain): <0.005%, +4 dBu, 20 Hz–20 kHz, unity gain, unwtd
THD to Main Output (1 kHz at unity gain): 0.005%, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd
EIN to Direct Output: +125 dB unwtd, +130 dB A-wtd
S/N Ratio to Direct Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd): -102 dB
S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd): -95 dB
Common Mode Rejection Ratio (1 kHz at unity gain): +65 dB
Gain Control Range (± 1 dB): -16 dB to +67 dB
Maximum Input Level (unity gain): +16 dBu
Phantom Power (± 2 VDC): +48 VDC

Line Inputs, Balanced:
Type: ¼" TRS Female, balanced mono
Frequency Response to Direct Outputs (at unity gain): 10 Hz-20 kHz, 0 / -0.5 dBu
Frequency Response to Main Outputs (at unity gain): 20 Hz-20 kHz, 0/-0.5 dBu
Input Impedance: 10 kO
THD to Direct Output (1 kHz at unity gain): <0.0007%, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd
THD to Main Output (1 kHz at unity gain): <0.005%, +4 dBu, 20 Hz-20 kHz, unity gain, unwtd
S/N Ratio to Direct Output (Ref = +4 dBu, 20 kHz BW, unity gain, A-wtd): -105 dB
S/N Ratio to Main Output (Ref = +4 dBu, 20 kHz BW, unity gain, A-wtd): -95 dB
Gain Control Range (± 1 dB): -20 dB to +20 dB
Maximum Input level (unity gain): +22 dBu

Line Inputs, Unbalanced:
Type: RCA Female, unbalanced (stereo pair)
Maximum Input Level: +22 dBu

Main Outputs:
Type: XLR Male, balanced (stereo pair); ¼” TRS Female, balanced (stereo pair)
Rated Output Level: +24 dBu
Output Impedance: 100O

Aux Outputs:
Type: ¼” TRS Female, balanced (mono)
Rated Output Level: +18 dBu
Output Impedance: 100O

Monitor Outputs:
Type: ¼” TRS Female, balanced (stereo pair)
Rated Output Level z: +18 dBu
Output Impedance: 100O

System Crosstalk:
Input to Output (Ref = +4 dBu, 20 Hz-20 kHz, unwtd): -90 dBu
Adjacent Channels (Ref = +4 dBu, 20 Hz-20 kHz, unwtd): -87 dBu

Noise Gate (Expander):
Threshold Range: -84 dB to 0 dB
Attack Time: Adaptive (0.2 - 2.5 ms)
Release Time: 70 ms
Expander Attenuation Range: 2:1

Compressor:
Threshold Range: -56 dB to 0 dB
Ratio: 1:1 to 14:1
Response Time (Attack/Release: 0.2 ms / 1.0s (“Tight”) to 180 ms / 1.0s (“Smooth”)
Auto Attack and Release: Attack = 10 ms, Release = 150 ms
Curve Types: hard and soft knee

EQ:
Type: 2nd-order shelving filter (Q = 0.55)
Low (Low-pass or Bandpass): 36 to 465 Hz, ±15 dB
Mid: 260 Hz to 3.5 kHz, ±15 dB
High (High-pass or Bandpass): 1.4 kHz to 18 kHz, ±15 dB

Digital Audio:
Host Interface: USB 2.0
ADC Dynamic Range (A-wtd, 48 kHz): 118 dB
DAC Dynamic Range (A-wtd, 48 kHz): 118 dB
Internal Processing: 32-bit, floating point
Sampling Rate: 44.1, 48 kHz
A/D/A Bit Depth: 24 bits
Reference Level for 0 dBFS: +18 dBu

Clock:
Jitter: <20 ps rms (20 Hz - 20 kHz)
Jitter Attenuation: >60 dB (1 ns in ˜ 1 ps out)

Power:
Connector: IEC
Input-Voltage Range: 100 to 240 VAC (factory-configured for country of destination)
Power Requirements (continuous): 100W

Physical:
Length: 15.56 inches (397 mm)
Width: 16 inches (406 mm)
Maximum Height: 5.5 inches (140 mm)
Weight: 20 lb.