StudioLive 24R 26-Input, 32-Channel Series III Stage Box and Rack Mixer

Computer system requirements:

Below are the minimum computer-system requirements for StudioLive 24R.

macOS
• macOS version 10.13 or later
• 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates)
• Available USB port

Windows
• Windows 10 or later (64-Bit Only)
• 200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support)
• Available USB port

The above are the hardware system requirements for this product.?DAW software and Operating System requirements vary.

Technical Specifications

Microphone Preamplifier:
Input Type: Combo locking XLR mic-¼” TRS line
Frequency Response to Main Output (at unity gain): 20-20 kHz, ±0.5 dBu
Input Impedance: 1 kO
THD to Main Output: <0.005%, +4 dBu, 20-20 kHz, unity gain, unwtd
S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd): 94 dB
Common Mode Rejection Ratio (1 kHz at unity gain): 65 dB
Gain Control Range (±1 dB): 0 dB to +60 dB
Maximum Input Level (unity gain): +12 dBu
Phantom Power (±2 VDC): 48 VDC, switchable per channel

Unbalanced Inputs (Ch. 23-24):
Type: RCA Female, unbalanced (stereo pair)
Maximum Input Level: +12 dBu, ±0.5 dBu

Main Outputs:
Type: XLR Male, balanced
Maximum Output Level: +24 dBu, ±0.5 dBu
Output Impedance: 100O

Mix Outputs:
Type: ¼” TRS Female, balanced
Maximum Output Level: +18 dBu, ±0.5 dBu
Output Impedance: 100O

Headphone Output:
Type: ¼” TRS Female, active stereo
Maximum Output: 100 mW/ch. @ 60O load
Frequency Response: 20 Hz – 20 kHz (± 0.5 dB)
THD+N: 0.01%, 1 kHz, max gain, 20 Hz BW, unwtd
S/N Ratio: 96 dB, 1 kHz, max gain, 20 Hz BW, unwtd

System Crosstalk:
Input to Output: -90 dB (Ref = +4 dBu, 20 Hz-20 kHz, unwtd)
Adjacent Channels: -87 dB (Ref = +4 dBu, 20 Hz-20 kHz, unwtd)

Digital Audio and Control:
ADC Dynamic Range: 115 dB (A-wtd, 48 kHz)
DAC Dynamic Range: 115 dB (A-wtd, 48 kHz)
USB Recording Port: USB 2.0, Type-B
Network Control Port: RJ-45
AVB Audio Network Port: Locking XLR Ethernet
Internal Processing: 32-bit, floating point
Sampling Rate: 48 kHz, 44.1 kHz
A/D/A Bit Depth: 24
Reference Level for 0 dBFS: +18 dBu
Total System Latency: 1.9 ms (local routing, analog in-analog out, all processing active)

Clock:
Jitter: <20 ps RMS (20 Hz - 20 kHz)
Jitter Attenuation: >60 dB (1 ns in, 1 ps out)

Power / Environmental:
Connector: IEC
Input-Voltage Range: 90 to 230 VAC (±10%)
Power Requirements (continuous): 85W
Recommended Ambient Operating Temperature: 0° to 40° Celsius / 32° to 104° Fahrenheit

Physical:
Height: 3.5” (90 mm)
Width: 19” (483 mm)
Depth: 12” (305 mm)
Weight: 10.8 lb. (4.9 kg)