RPI Remote Power Injector for DR6 and RAD26


Ships Directly from Manufacturer. Contact Us for Availability.

The RPI is a remote powering device for the DR6 Touchscreen Digital Remote and the RAD26 One-Room Remote Audio Device. This power supply is needed when using the DR6 or RAD26 with rackmount HAL units (HAL3s and legacy units). The RPI is connected between the HAL and the peripheral controller using shielded Cat 5e cable (or better), and can be located at any point between the HAL units and the peripherals within a 325 ft (100m) maximum distance. It requires 100-240 VAC and utilizes an included standard IEC cable. Its form factor is a rugged metal box, and can be mounted to any flat surface.

• Provides necessary power for the RANE DR6 and RD26 when used with HAL rackmount units
• Requires CAT5e (or better) for input and output connection
• Rugged chassis mounts to any flat surface



Supported HAL Peripherals: DR6 RAD26
Connectors: Data Input: RJ45 to DR port on HAL unit, Data Output: RJ45 to HAL peripheral
Mounting Hardware: (4) screws (not included)
RPI Power Output: 24 VDC @ 500 mA
Maximum Distance: 325 ft / 100m between HAL – RPI – HAL peripheral
Cable Required: Shielded CAT 5e (or better)
Power Required: 100-240 VAC, 50/60 Hz
Power Consumption: 18 W maximum
Maximum Operating Temperature: 104 °F / 40 °C
Dimensions (width x depth x height): 6.90” x 2.79” x 1.78” (175 mm x 71 mm x 45 mm)
Weight: 14.1 oz (400g)

IEC Power Cable
Safety & Warranty Manual
More Information
Weight 11.200000
Length 6.8892
Width 9.96
Height 10.79
Color White
Compatibility DR6 and RAD26
Manufacturer Rane
Manufacturer Model Number RPI
Manufacturer Part Number RPIXUS
UPC 694318023143
Write Your Own Review
You're reviewing:RPI Remote Power Injector for DR6 and RAD26