FEATURES:
40 mm pixel pitch
62 cd per meter calibrated
40 lumen per foot calibrated
High-quality 16-bit per color image processing technology
Pixel-level brightness and color calibration for optimal image quality
P3/DMX controllable (automatic protocol detection)
Intuitive mapping and addressing via P3 System Controller
Combined power/data input (single cable for power and data input)
Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
Available in standard length of 1280 mm and 320 mm (customized lengths also available)
SPECIFICATIONS:
PHYSICAL
Length: Available in 320 mm (12.6 in.) and 1280 mm (50.4 in.) length versions
Width: 27 mm (1.1 in.)
Height:
with flat diffuser / clear front: 32 mm (1.3 in.)
with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.)
with graze (asymmetric wallwasher) lens: 42 mm (1.7 in.)
with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.)
with round diffuser: 42 mm (1.7 in.)
with round diffuser in mounting profile: 84 mm (3.4 in.)
Weight: 1.2 kg / m (0.9 lb. per foot)
Custom lengths are available to special order on project basis as follows:
Minimum custom length: 320 mm (12.6 in.)
Maximum custom length: 2000 mm (78.8 in.)
Custom length increments: 40 mm (1.6 in.)
NB: To allow for thermal expansion, fixtures are 10 mm shorter than the nominal lengths given above
*Fixtures must be installed with a 10 mm gap to allow for thermal expansion
CONTROL AND PROGRAMMING
Control options: Martin P3 System Controller via Martin P3 PowerPort 1500 / Martin P3 PowerPort 1000 IP, and/or DMX
Control modes: RGB, basic, segment and pixel-level
Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
Protocol detection: Automatic
Setting and addressing: Martin P3 System Controller or RDM-compliant controller
DMX channels: 3/10/13/31/55/199
Color and intensity calibration: Pixel-level
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Firmware update: Via Martin P3 System Controller
CONTROL/USER INTERFACE
Device status: Multicolor visual indication
Device test and reset: Magnetic switch to call up local test patterns and reset device
OPTICS
Options:
Clear Front: Viewing angle 110°
Flat Diffuser: Viewing angle 160°
Round Diffuser: Viewing angle 260°
Square Diffuser: Viewing angle 300°
Asymmetric graze Lens: Beam angle 25° X 85°
LED manufacturer: Osram
Minimum LED lifetime: 50, 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer’s test conditions
PHOTOMETRIC DATA
Color resolution: 16 bits per color (48 bit per pixel)
Pixels: 25 per meter
Pitch (pixel center-to-center): 40.00 mm
Luminous intensity: 62 cd per meter (calibrated mode)
Total output, calibrated mode: 125 lumens per meter (2, 083 nits (modules spaced 30 mm center-to-center))
VIDEO PROCESSING
Brightness control
Gamma correction and control
Color temperature control
Color space control
Calibration processing
Synchronization
SIGNAL PROTOCOL
P3 (via Martin P3 PowerPort) or DMX
CONSTRUCTION
Color: Clear anodized (customized colors available on project basis)
Base: Extruded aluminum profile
Protection rating: IP66
Impact resistance: IK05
Corrosion resistance: C5-M (very high corrosivity/marine, ISO 2944)
Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
0, 7g RMS Random (IEC 60068-2-64)
RoHS compliant
INSTALLATION
Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
Orientation: Any
CONNECTIONS
Power and data input: 6-pin custom (BBD) IP66-rated
Power and data thru: 6-pin custom (BBD) IP66-rated
Hot plugging compatible
ELECTRICAL
Nominal input voltage: 48V DC +/- 4%
Power supply options: Martin P3 PowerPort 1500, Martin P3 PowerPort 1000 IP, Martin IP66 PSU or generic 48 VDC PSU
Maximum total power consumption: 8.5 W per meter (at max. intensity, full white)
Surge protection: 4 KV
THERMAL
Cooling: Convection
Maximum ambient temperature (Ta max.): 55° C (131° F)*
Minimum ambient temperature (Ta min.): -30° C (-22° F)
Total heat dissipation (calculated, +/- 10%): 30 BTU/hr per meter
*Above this temperature, the fixture regulates output to protect from overheating (P3 thermal throttling)
APPROVALS
EU safety: EN 60950-1, EN 60950-22
EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
US safety: UL 60950-1, UL 60950-22
US EMC: FCC Part 15 Class A
Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
Canadian EMC: ICES-003 Class A
Australia/NZ: RCM
ACCESSORIES
Magnetic Test Tool, set of 10: P/N 91610139
Mounting hardware:
Exterior PixLine 40 Mounting Profile, 310 mm (12.2 in.), aluminum: P/N 91611700
Exterior PixLine 40 Mounting Profile, 1270 mm (50.0 in.), aluminum: P/N 91611710
Exterior PixLine Mounting Profile Locks, set of 10:P/N 91611725
Input Adapter Cables:
Power + Data Input Adapter, 4-pin male XLR (for P3 PowerPort 1500) to female BBD, 0.25 m (0.9 ft.): P/N 91616046
Power + Data Input Adapter, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25 m (0.9 ft.): P/N 91616048
Power + Data Input Adapter, 5-pin male XLR + male Martin IP66 PSU to fem. BBD, 0.25 m (0.9 ft.): P/N 91616050
Power + Data Input Adapter, 5-pin male XLR + 4-pin male XLR to female BBD, 0.25 m (0.9 ft.): P/N 91616049
Output Adapter Cables:
Power + Data Output Adapter male BBD to 4-pin female XLR, 0.25 m (0.9 ft.): P/N 91616047
DMX Output Adapter, male BBD to 5-pin female XLR, 0.25 m (0.9 ft.): P/N 91616051
Extension Cables, CMX Type:
Power + Data Extension Cable, Installation type CMX, BBD-BBD 1 m (3.3 ft.): P/N 91616055
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5 m (8.2 ft.): P/N 91616056
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 5 m (16.4 ft.): P/N 91616057
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 10 m (32.9 ft.): P/N 91616058
Power + Data Extension Cable, Installation type CMX, BBD-BBD, 25 m (82.1 ft.): P/N 91616059
Power + Data Extension Cable, Installation type CMX, without connectors, 100 m (328.1 ft.): P/N 91616060
Extension Cables, Low Smoke Zero Halogen Type:
Power + Data Extension Cable, Installation type LSZH, BBD-BBD 1 m (3.2 ft.): P/N 91616012
Power + Data Extension Cable, Installation type LSZH, BBD-BBD 2.5 m (8.2 ft.): P/N 91616013
Power + Data Extension Cable, Installation type LSZH, BBD-BBD 5 m (16.4 ft.): P/N 91616014
Power + Data Extension Cable, Installation type LSZH, BBD-BBD 10 m (32.8 ft.): P/N 91616015
Power + Data Extension Cable, Installation type LSZH, BBD-BBD 25 m (82 ft.): P/N 91616016
Power + Data Extension Cable, Installation type LSZH, without connectors, 100 m (328.1 ft.): P/N 91616017
Loose Connectors:
Power + Data Cable Connector, BBD, male: P/N 91611750
Power + Data Cable Connector, BBD, female: P/N 91611751
Blanking caps for unused female BBD connectors, set of 10: P/N 91616052
RELATED ITEMS
Martin P3 PowerPort 1500: P/N 90721040
Martin P3 PowerPort 1000 IP Installation: P/N 90721080
Martin DMX PowerPort 375: P/N 90721094
Martin IP66 PSU 240 W external power supply unit: P/N 90760330
Martin P3-050 System Controller: P/N 90721090
Martin P3-150 System Controller: P/N 90721015
Martin P3-300 System Controller: P/N 90721060
Martin P3-PC System Controller: Free download from martin.com
ORDERING INFORMATION
Exterior PixLine 40 RGB, 310 mm, Graze (Asymmetric Lens), Left, Aluminum: P/N 90356735
For graze models, Left or Right = direction of light output when looking from male to female connector
Validate your login