FEATURES:
P3 image processing technology
Setup and addressing via P3 System Controller family
No local configuration needed
P3 input and thru to allow daisy-chaining
4 hybrid power/data output ports
Truss-mountable or freestanding
Can be located up to 50 m away from the creative LED video products
IP65
SPECIFICATIONS:
PHYSICAL
Length: 520 mm (20.5 in.)
Width: 460 mm (18.2 in.)
Height: 146 mm (5.8 in.)
Weight: 8.5 kg (18.8 lb.)
CONTROL AND PROGRAMMING
Addressing and status: Via P3 System Controller
Mapping: Via P3 System Controller
Firmware update: Via P3 System Controller
CONTROL/USER INTERFACE
Device status: Multicolor status LED
Power output status: Four LEDs
Data output status: Four LEDs
Device test and reset: Pushbutton to call up local test patterns and reset device
Status LEDs and pushbutton can be disabled remotely if required.
P3 SIGNAL PROTOCOL
Signal type: Gigabit Ethernet
Protocol: Proprietary Martin P3
Hot pluggable: Yes, electrically isolated at all connections
Cable type: Ethernet, CAT 5e or better
Cable length: Up to 100 m (328 ft.) between any 2 devices, extendable with Ethernet switch or conversion to fiber
SYSTEM INTEGRATION
VC-Dot family via VC-Feeder
Exterior PixLine family
VDO Sceptron family
VC-Grid family (indoor product)
VC-Strip family (indoor product)
Exterior Dot-HP family
CONSTRUCTION
Housing: Aluminum
Color: Matte black
Protection rating: IP65
NEMA enclosure rating: Type 3
Effective Projected Area (EPA): 0.22 m2
RoHS compliant
INSTALLATION
Mounting: Flown from rigging clamps or freestanding
Orientation: Any, except with connectors facing up or lid facing down
CONNECTIONS
Power input: Neutrik powerCON TRUE1
P3 data in/out: Neutrik etherCON Cat 6
Combined power & data out: Four 6-pin custom (BBD) IP66-rated sockets
ELECTRICAL
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical total power consumption: 1000 W (including full load of connected display devices, all at full intensity)
Typical half-cycle RMS inrush current: 20.9 A (At 230 V, 50 Hz)
Total power consumption in idle state (at 25° C, all connected devices powered off): 22 W
THERMAL
Cooling: Convection
Maximum ambient temperature (Ta max.): 55° C
Minimum ambient temperature (Ta min.): -30° C
Total heat dissipation (calculated, +/- 10%): 345 BTU/hr. (not including display devices but with system at full load)
APPROVALS
EU safety: EN 60950
EU EMC: EN 55032, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
US safety: ANSI/UL 60950-1
Canadian safety: CSA C22.2 No. 60950-1
ACCESSORIES
Power connectors:
Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W (female): P/N 91611789
Power cables:
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91610174
Data cable:
Data Cable, Cat 6 etherCON-etherCON 0.45 m (1.4 ft.): P/N 91611781
Data Cable, Cat 6 etherCON-etherCON 1.2 m (3.9 ft.): P/N 91611782
Data Cable, Cat 6 etherCON-etherCON 5 m (16.4 ft.): P/N 91611783
Data Connector, Cat 6 etherCON: P/N 91611787
Adapters for connecting to VC-Dot cables:
Power + Data Adapter M16-BBD 0.25 m (9.8 in.): P/N 91616053
Power + Data Adapter BBD-M16 0.25 m (9.8 in.): P/N 91616054
Rigging hardware:
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
RELATED ITEMS
Martin P3-PC System Controller: Free download from martin.com
P3-050 System Controller: P/N 90721090
P3-100 System Controller: P/N 90721010
P3-150 System Controller: P/N 90721015
P3-200 System Controller: P/N 90721020
P3-300 System Controller: P/N 90721060
ORDERING INFORMATION
Martin P3 PowerPort 1000 IP, Rental Model: P/N 90721070
Validate your login