MAC Aura XB Extra-Bright (Cardboard Box) - White

FEATURES:
Super-bright single-lens wash with fully premixed color
Broad color palette, RGBW color mixing
Eye-candy Aura Effect
Uniform shades
Built-in FX engine
10 to 60° uniform zoom
6000 Lumens output
Rapid movement
Compact, low weight design (6.5 kg)
High efficiency, low power consumption, long lifetime

SPECIFICATIONS:
PHYSICAL
Length: 302 mm (11.9 in.) across yoke
Width: 302 mm (11.9 in.) across yoke
Height: 360 mm (14.2 in.), head straight up
Weight: 6.5 kg (14.4 lb.) without ACCESSORIES
DYNAMIC EFFECTS
Beam color mixing: RGBW
Aura (secondary lens array illumination) color mixing: RGB
Beam color temperature control: CTO, variable 10, 000 - 2500 K
Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
Preprogrammed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
Electronic dimming: Independent beam and aura, four dimming curve options
Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX

CONTROL AND PROGRAMMING
Control systems: DMX, RDM
Control options: Independent or synchronized Beam and Aura control
Control resolution: 8-bit, with 16-bit control of pan & tilt
Setting and addressing: Control panel with backlit graphic display
DMX channels: 14/25
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485
Firmware update: Via DMX with Martin USB Duo DMX Interface Box

OPTICS AND PHOTOMETRIC DATA
Light Source: 19x 15W RGBW LED Array System
LED Refresh Rate: Beam 1200 Hz, Aura 4395 Hz
Minimum LED Lifetime: 50, 000 hours (to >70% luminous output)*
Total luminous output (wide, one-tenth peak): 6000 lumens
Total luminous output (narrow, one-tenth peak): 4300 lumens
Video compatibility: Designed for use with HD/high-speed video cameras

*Figure obtained under manufacturer's test conditions

CONSTRUCTION
Housing: High-impact thermoplastic, flame-retardant to UL 94 5 VA
Color: Black
Protection rating: IP20

INSTALLATION
Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 200 mm (8.0 in.)
Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.)

CONNECTIONS
AC Power: Neutrik powerCON TRUE1 NAC3PX dual socket
AC power input socket: Accepts Neutrik powerCON TRUE1 NAC3FX-W cable connector
AC power thru socket: Accepts Neutrik powerCON TRUE1 NAC3MX-W cable connector
DMX and RDM data in/out: 5-pin locking XLR

ELECTRICAL
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current: 10.7 A
Typical power consumption, all effects static, zero light output: <25 W
Maximum total power consumption: 400 W

TYPICAL POWER AND CURRENT
100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
120 V, 60 Hz: 355 W, 3.2 A, PF 0.99
208 V, 60 Hz: 350 W, 1.8 A, PF 0.97
230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
240 V, 50 Hz: 349 W, 1.6 A, PF 0.95

Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.

APPROVALS
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17 (CSA E60598-1)
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241

INCLUDED ITEMS
User manual: P/N 35000254
M12 bolt suitable for use with Martin rigging clamps
Note that power cables and connectors are not included and must be ordered separately

ACCESSORIES
Power connectors:
Cable connector, Neutrik powerCON TRUE1 NAC3FX-W (female): P/N 91611789
Cable Connector, Neutrik powerCON TRUE1 NAC3MX-W (male): P/N 91611788

Cables, 16 A, for connection to power in chains:
Power input cable, H07RN-F, 2.5 mm², 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm², 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174

Cables, 16 A, for relaying power in chains:
Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

(H07RN-F are European approved cables, SJOOW are US approved cables)

Optical Accessories:

MAC Aura / Aura XB Soft Lens Kit: P/N 91611730

Installation hardware:
Quick surface mounting bracket for MAC Aura XB, set of 5: P/N 91606018
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Flightcase: 6-unit flightcase for MAC Aura: P/N 91515020

RELATED ITEMS
Martin RDM 5.5 Splitter: P/N 90758150
Martin Companion Cable: P/N 91616091
Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

ORDERING INFORMATION
MAC Aura XB in cardboard box: P/N 90232100