FEATURES:
Bright 800 watt / 6, 500K LED light source
34, 000 lumen output
Crisp optics with flat field
1:8 Fast zoom
Fat beam look with 160 mm front lens
CMY color mixing - Vibrant color mixing with a superior palette of colors matching the MAC range
Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette
6-slot color wheel –for added color choice and split color effects
Full Curtain Framing blades with +/- 60° rotation of entire system for flexible shape generation
6 rotating/indexing gobos – All renowned Martin glass gobos
7 static gobos for great morphing effects
Animation wheel with continuous bi-directional rotation
Iris – Fast and tight iris
Two prisms - 4-facet and linear – rotation and index control for dynamic effects
Soft frost – A light frost leaves gobo artwork visible with a beautiful soft edge.
Heavy frost – for wash light effects
Compact and low weight design
SPECIFICATIONS:
PHYSICAL
Length: 431 mm (17 in.)
Width: 290 mm (11.4 in.)
Height: 801 mm (31.5 in.)
Weight: 41 kg (90.4 lb.)
DYNAMIC EFFECTS
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Electronic dimming: 0 - 100%, four dimming curve options
Color mixing: CMY, independently variable 0-100%
Color temperature control: Variable 6500 - 2700 K
Color wheel: 6 color filters plus open
Gobo animation: Animation wheel, indexing, continuous rotation with variable speed and direction
Rotating gobo wheel: 6 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 7 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Zoom: Motorized
Focus: Motorized
Framing: Rotatable framing module, +/-60°, with 4 individually controllable full framing blades with variable angle and position.
Prism: 2 rotating/indexing prisms (4-facet circular prism and 6-facet linear)
Frost: Soft frost effect and heavy frost effect
Pan: 540°, coarse & fine control and speed
Tilt: 260°, coarse & fine control and speed
CONTROL AND PROGRAMMING
Control options: DMX
16-bit control: Dimming, pan and tilt
Setting and addressing: Control panel with backlit LCD display
DMX channels: 42
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
OPTICS
Front lens diameter: 160 mm
Zoom range: 7° - 56° (1:8)
Light source: 800W LED engine
Minimum LED lifetime: 20000 hours (to >70% luminous output)*
*Manufacturer's figure obtained under manufacturer's test conditions
PHOTOMETRIC DATA
Light engine luminous output: 70000 lumens
Fixture luminous output: 34000 lumens
CRI (Color Rendering Index): >70
CCT: 6500 Kelvin
LED refresh rate: 3600 Hz
CONSTRUCTION
Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP 20
GOBOS
Gobo diameter: 30 mm +/-0.2 mm (+/- 0.008 in.)
Maximum image diameter: 25 mm (0.98 in.)
Gobo thickness, maximum: 1.1 mm (0.04 in.)
INSTALLATION
Mounting points: Two quarter-turn brackets for rigging
Orientation: Any
CONNECTIONS
AC power in, thru: Neutrik powerCON TRUE1
DMX data in/out: 5-pin locking XLR
ELECTRICAL
AC power: 100-240V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Half-cycle RMS inrush current at 230 V, 50 Hz: 52.3A
Idle Consumption: 94 W, all effects static, zero light output
TYPICAL POWER AND CURRENT
120 V, 60 Hz: 10.8A, 1270W, PF 0.99
230 V, 50 Hz: 5.5A, 1240W, PF 0.97
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor.
THERMAL
Cooling: Forced air (temperature regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 0° C
Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
Total heat dissipation (calculated, +/- 10%): 4340 BTU/hr.
APPROVALS
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, -3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM
Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
INCLUDED ITEMS
2 x Omega brackets for rigging clamp attachment
ACCESSORIES
Cables, 16 A, for connection to power in chains:
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Cables, 16 A, for relaying power in chains:
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Connectors:
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler Clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
RELATED ITEMS
Martin RDM 5.5 Splitter: P/N 90758150
Martin Companion Cable: P/N 91616091
Martin Companion Software Suite (including firmware uploader)
ORDERING INFORMATION
Martin ERA 800 Performance in cardboard box: P/N 9025122052
Martin ERA 800 Performance – White in cardboard box: P/N 9025122053
Flightcase, two unit for ERA 800: P/N 91512255
Validate your login