FEATURES:
MUX-22 Series
• 1 RU 8-Port Fiber Transport Interface Devices
• Seamlessly transports, routes and distributes audio, video, intercom and control data over one fiber optic cable
• Full integration into SANE, DiViNe and Optocore network
• SD/HD/3G-SDI capacity
• 8 SD/HD/3G-SDI ports
• 4 simplex LC fiber ports
• CWDM (Coarse Wavelength Division Multiplexing) module
• Tri/Bi-level video clock input and output module
• Optocore module
• 2 x Optocore 2 Gbps ports
• 2 x SANE/LAN ports
• 2 x LAN ports
• 4 x RS485/422 ports
• Word Clock I/O
• Redundant power supplies
• Full control with ProGrid control software
• LAN, USB and RS232 ports for configuration
SPECIFICATIONS:
Intercom Ports
Connector: 4-wire Clear-Com standard; 4 x input, 4 x output RJ45, Clear-Com convention
Optical Link
Connection: Duplex LC
Protocol: Optocore
Transmission: Full Duplex
Fiber Cable Lengths: Standard single mode transceiver <10 km; Special single mode transceiver < 80 km (on request)
SANE, LAN ports
Auxiliary Ports
Convention EIA/TIA-485
Data channels: Digital control data; 4
Data rate: Up to 10 Mbps
Impedance: Termination; 330 O; Source; = 10 O
Video
Standards: SD, ED, HD, Dual Link, 3G
Complies with SMPTE: 259M, 292M, 344M, 372M, 424M
Interface: SDI – Serial Digital Interface
Word Clock
Hardware standard
BNC – 75 O
Data Rate: Dependent on sample rate; Up to 192 kHz
Impedance: Output = 5 O; Input 75 O
Drive Level: Output; = 1 Vpp
Zero Level: Referring to GND; +1.7 V
Sense Level: Input; = 400 mVpp
Optical Connection
Complies with 21 CFR 1040.10 and 1040.11
Remote Control
RS232: EIA/TIA – 232; 57 600 Baud
USB: USB 2.0 – Device; 12 Mbit/s
LAN: IEEE – 802.3; 10/100 Mbit/s
Power Supply
Type: Switch-mode, universal input
Main Voltage: 100-240 V; 50-60 Hz
Frequency: 50-60 Hz
Cooling: Passive, via surface and ventilation openings on both sides of the device
Dimensions
19 in. W x 1.73 in. H x 7.87 in. D
(483 mm x 43.94 mm x 199.9 mm)
Weight
6.6 lb. (3.0 KG)
Validate your login