Ships Directly from Manufacturer. Contact Us for Availability.
$585.00
Overview
Pathway eDIN Demultiplexer converts DMX512 signals to 0-10 VDC, or other common DC ranges, or to current-sinking control of LED drivers, Mark 7-type fluorescent ballasts, or solid state relays.
The eDIN #1004 converts DMX512 to 16 channels of analog DC output voltage. Diode shunts allow user-selection between current sourcing applications—typically for theatrical dimmers—or current-sinking control—typically for LED fixture driver s or Mark VII electronic fluorescent ballast control. A non-dim mode supports solid-state relay control.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Indicator LEDs for power, processor, and DMX input status
• Standard DC output modes of 0-10V, 0-15V, 0-2.5V, or 0-5V
• Custom mode allows user-set minimum and maximum DC output up to 16V
• EFBC/LED Driver mode allows single DMX channel control of mains voltage (via SSR) and 0-10V dimming
• Maximum current rating per output of 10 mA (sourcing) or 30 mA (sinking)
• CCL “Panic Input” drives all outputs to full
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
The eDIN #1004 converts DMX512 to 16 channels of analog DC output voltage. Diode shunts allow user-selection between current sourcing applications—typically for theatrical dimmers—or current-sinking control—typically for LED fixture driver s or Mark VII electronic fluorescent ballast control. A non-dim mode supports solid-state relay control.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Indicator LEDs for power, processor, and DMX input status
• Standard DC output modes of 0-10V, 0-15V, 0-2.5V, or 0-5V
• Custom mode allows user-set minimum and maximum DC output up to 16V
• EFBC/LED Driver mode allows single DMX channel control of mains voltage (via SSR) and 0-10V dimming
• Maximum current rating per output of 10 mA (sourcing) or 30 mA (sinking)
• CCL “Panic Input” drives all outputs to full
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
Validate your login