Ships Directly from Manufacturer. Contact Us for Availability.
Overview
Pathway eDIN LED Dimmer/DC Driver provides control over common anode LED fixtures and solid state relays.
The eDIN #1008 provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures—typically string lighting. Multiple modes, including 16-bit, ensure a smooth dimming curve. The module also provides efficient switching control of DC devices such as solid state relays and solenoids.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Controls constant voltage LED fixtures rated between 5 to 30 VDC
• Six PWM outputs, individually fused at 4A
• 6A-fuse model available for use with 12V LED fixtures
• Two spare fuses included
• DMX512-present relay (normally open or normally closed)
• Contact closure ‘panic’ input drives all outputs to full
• Auxiliary 0-10V analog inputs HTP-merged with DMX input
• Indicator LEDs for power, processor, DMX input, active output
• User-adjustable smoothing algorithm
• User-adjustable minimum and maximum output levels
• Multiple loss-of-signal options
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• User-initiated diagnostics and test modes
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
The eDIN #1008 provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures—typically string lighting. Multiple modes, including 16-bit, ensure a smooth dimming curve. The module also provides efficient switching control of DC devices such as solid state relays and solenoids.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Controls constant voltage LED fixtures rated between 5 to 30 VDC
• Six PWM outputs, individually fused at 4A
• 6A-fuse model available for use with 12V LED fixtures
• Two spare fuses included
• DMX512-present relay (normally open or normally closed)
• Contact closure ‘panic’ input drives all outputs to full
• Auxiliary 0-10V analog inputs HTP-merged with DMX input
• Indicator LEDs for power, processor, DMX input, active output
• User-adjustable smoothing algorithm
• User-adjustable minimum and maximum output levels
• Multiple loss-of-signal options
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• User-initiated diagnostics and test modes
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
Validate your login