DMX/RDM eDIN Fully-Isolated Merger (3 Ports)

MODES
• Mode 1 : RDM Hub
• Module detects and latches to a DMX input applied to any port. Automatically routes DMX signal to the other two ports. If a second source is applied, that source is ignored until the initial source stops. Module acts as RDM responder and proxy. Any downstream RDM responder may be discovered and configured using an RDM-enabled console or controller.
• Mode 2 : RDM A/B Select
• Allows user selection, through use of dry contact closure, of input signal arriving at Port B to be selected and routed to the output (Port C), over signal arriving as input at Port A. When dry contact is open, the signal arriving at Port A will be routed to the output (Port C). Ideal for switching between consoles on the fly. Module acts as RDM responder and proxy. Any downstream RDM responder may be discovered and configured using an RDM-enabled console or controller.
• Mode 3 : Priority
• Provides predictable signal priority arrangements of DMX sources. Port A is given priority over Port B. Module acts as RDM responder. However, proxy functions are disabled and downstream RDM responders are not discoverable.
• Mode 4 : Merge
• Provides HTP (highest-takes-precedence) merging of two DMX sources on Port A and B, and output on Port C. Module acts an RDM responder. However, proxy functions are disabled and downstream RDM responders are not discoverable.

SPECIFICATIONS
• 250V fault protection on input and output ports
• Input operating voltage: 9-30 VDC
• 5W power consumption
• Operating conditions: -10° to +50°C (14° to 122°F); 10-90% relative humidity, non-condensing

STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A
• ANSI E1.20 RDM - Remote Device Management
• RoHS 2002/95/EC
• Class 2 Low Voltage

WEIGHTS AND DIMENSIONS
• 0.30 lb. (0.120 kg)
• 3.6” W x 4.5”L x 1.5” H (91 mm x 115 mm x 38 mm)