CDi 2|300 CDi DriveCore Power Amplifier with Analog Input - 2 Channels (300 W)
$1,512.33
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 2|300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100 Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
FEATURES:
• DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
• Network Control and Monitoring – Through Harman’s HiQNet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
• DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
• Input Router
• Input Delay – Up to 1000 ms
• Input Parametric EQ – 8 band
• Crossover
• Output Parametric EQ – 8 band
• Output Delay – Up to 100 ms
• LevelMAX Limiter
FEATURES:
• DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
• Network Control and Monitoring – Through Harman’s HiQNet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
• DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
• Input Router
• Input Delay – Up to 1000 ms
• Input Parametric EQ – 8 band
• Crossover
• Output Parametric EQ – 8 band
• Output Delay – Up to 100 ms
• LevelMAX Limiter
SPECIFICATIONS:
• BLU link: No
Channels: 2
Sensitivity (for full rated power at 8 ohms): 0.7V RMS
Rated Power Output (per channel @ 4 ohms): 300W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20 Hz - 20 kHz) at 8 ohms): > 104 dB
THD (full rated power, 20 Hz - 20 kHz): 0.35%
Damping Factor (20 Hz to 100 Hz): > 1000
Frequency Response (8O, 20 Hz - 20 kHz): +/-0.5 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: > 80 dB
Input Impedance (nominally balanced, nominally unbalanced): 20 kO balanced, 10 kO unbalanced
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25
Weight: 14.56 lb. (6.6 kg)
Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V~
• BLU link: No
Channels: 2
Sensitivity (for full rated power at 8 ohms): 0.7V RMS
Rated Power Output (per channel @ 4 ohms): 300W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20 Hz - 20 kHz) at 8 ohms): > 104 dB
THD (full rated power, 20 Hz - 20 kHz): 0.35%
Damping Factor (20 Hz to 100 Hz): > 1000
Frequency Response (8O, 20 Hz - 20 kHz): +/-0.5 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: > 80 dB
Input Impedance (nominally balanced, nominally unbalanced): 20 kO balanced, 10 kO unbalanced
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25
Weight: 14.56 lb. (6.6 kg)
Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V~
Weight | 19.000000 |
---|---|
Length | 19 |
Width | 22 |
Height | 8 |
Color | Black |
Manufacturer | Crown by HARMAN |
Manufacturer Model Number | CDi2x300 |
Manufacturer Part Number | NCDI2X300-U-US |
UPC | 691991006418 |
Size | 2 Channels |
Write Your Own Review
Validate your login
Sign In
Create New Account