CDi DriveCore Power Amplifier with Analog Input, 4 Channels (600W) - DISCONTINUED

FEATURES:

• Exclusive multi-patented DriveCore Technology – The patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for
• better performance, lower power consumption, and improved reliability
• BLU link digital audio transport – Up to 256 Channels of digital audio over Category 5e cabling (available on BLU link CDi DriveCore models)
• Supports configuration and control using HiQNet Audio Architect
• Monitoring and control over TCP/IP
• Color LCD and front panel user interface for amplifier configuration, control, and monitoring
• Programmable GPIO (general purpose input/output) control port
• Digital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAX limiters)
• Support for importing of FIR filter coefficients
• 20 device presets – 1 factory and 19 user
• 96 kHz/32-bit floating-point signal processing
• Universal power supply with PFC for reduced current draw and industry-leading efficiency
• Power saving modes
• Remote power off – Sleep mode activated via AUX port
• 70 Vrms/100 Vrms direct drive
• Each channel independently configurable for low z or high z operation
• Advanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage,
• and high-frequency overload
• Three year, no-fault transferable warranty – Your investment is fully protected
• Complies with GreenEdge by HARMAN – Environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient
• operation
• Support for BSS Audio Soundweb Contrio Ethernet wall controllers
• Included speaker tunings for various JBL speaker models

SPECIFICATIONS:

• Number of Channels: 4
• Power Rating: 600 W per Channel - 1200 W Bridged
• Load Impedance / Voltage: Stereo: 2 / 4 / 8 / 16 Ohms per Channel - 70 / 100 V per Channel; Bridged: 4 / 8 / 16 Ohms -140 / 200 V

Performance:
• Protections: DC Fault, Low Impedance, Open Circuit, Overcurrent, Overvoltage, Ultrasonic, Under-voltage
• Frequency Response: 20 Hz to 20 kHz ±0.25 dB (8 Ohms)
• Damping Factor: >1000
• Input Sensitivity: Line: 0.7 Vrms to 2.5 Vrms / -.8 dBu to 10.2 dBu (at 8 Ohms); 1 Vrms to 3.5 Vrms / 2.2 dBu to 13.2 dBu (at 70 V); 1.4 Vrms to 5 Vrms / 5.2 dBu to 16.2 dBu (at 100 V)
• Input Impedance: 10 Kilohms (Balanced); 5 Kilohms (Unbalanced)
• Max Gain: 34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V)
• Max Input Level: +20 dBu
• SNR: >104 dB
• THD: 0.35% (at Rated Power)
• Intermodulation Distortion: =0.35%
• Crosstalk: >80 dB (Below Rated Power)
• CMRR: >70 dB

Signal Processing:
• DSP: 32-Bit Floating Point DSP at 96 kHz
• Audio Delay: Adjustable Up to 1000 ms per Channel
• Crossover:
• High-Pass:
16 to 20 kHz, 12/24/48 dB/Octave Bessel
High-Pass:
16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth
High-Pass:
16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley
Low-Pass:
16 to 20 kHz, 12/24/48 dB/Octave Bessel
Low-Pass:
16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth
Low-Pass:
16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley
• EQ: 8-Band Parametric EQ per Channel
• Limiting: Yes

Connectivity:
• I/O: 2 x Terminal Block 6-Pin Balanced Line Input; 2 x Barrier Strip 4-Pin Speaker Output
• Digital I/O: 1 x RJ45 Ethernet Input/Output (Control)
• USB: None

Power:
• AC Input Power: Universal: 100 to 240 VAC, 50 / 60 Hz
• AC Power Connector: 1 x IEC 15 A / NEMA 5-15
• Current Consumption:
• 120 VAC:
4.1 to 4.5 A (1/8 Power)
5 to 9.8 A (1/3 Power)
230 VAC:
2 to 2.3 A (1/8 Power)
2.7 to 5.1 A (1/3 Power)
• Power Consumption:
120 VAC:
201 to 225 W (1/8 Power)
178 to 434 W (1/3 Power)
230 VAC:
144 to 213 W (1/8 Power)
169 to 443 W (1/3 Power)

Physical:
• Display & Indicators Front Panel: 1 x Multi-Color Graphic LCD
• Rackmount Size: 2 RU
• Cooling: Fan (Variable Speed)
• Thermal Dissipation: 1512 BTU/hr (Maximum)
• Dimensions: 19.0 x 3.5 x 12.2" / 48.3 x 8.9 x 31.1 cm
• Weight: 16.3 lb. / 7.4 kg