ComTech DriveCore Power Amplifier with 4 Channels (75W)
$1,339.89
In stock
SKU
SP36303
Powering this remarkable amplifier is the pioneering technology of DriveCore, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.
FEATURES:
• Flexible Input Routing
• Convection Cooled
• Universal Power Supply
• Integrated Life-Safety Features
• Up to 8X125W in 1U chassis with no fan
• DriveCore technology provides >90% efficiency with no compromise in performance
• Patented Feedback and Protection Circuits
• Amplifier is stable for 2 – 16 Ohm Loads
• XFMR 4/8 needed for 70V/100V Applications
SPECIFICATIONS:
• Channels 4
• Sensitivity 1.4 V
• Rated Power Output (all channels driven) 75W per CH @ 4 ohms, 75W per CH @ 8 ohms
• Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 110 dB
• THD (full rated power, 20 Hz - 20 kHz) < 0.05%
• Intermodulation Distortion (from 0 dB down to -30 dB) < 0.05%
• Frequency Response (at 1W, 4/8 ohms) +/- 0.5 dB
• Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB
• Common Mode Rejection (20 Hz to 1 kHz) > 55 dB, typically > 70 dB
• Voltage Gain 25 dB
• DC Offset +/- 20 mV
• Idle Power Consumption (Standard Mode) 15.0W
• Dimensions 1.75" x 19" x 15.19"
• Weight 10 lb./4.54 kg
• Shipping Weight 15 lb./6.8 kg
• IEC Power Connector 15A
• Flexible Input Routing
• Convection Cooled
• Universal Power Supply
• Integrated Life-Safety Features
• Up to 8X125W in 1U chassis with no fan
• DriveCore technology provides >90% efficiency with no compromise in performance
• Patented Feedback and Protection Circuits
• Amplifier is stable for 2 – 16 Ohm Loads
• XFMR 4/8 needed for 70V/100V Applications
SPECIFICATIONS:
• Channels 4
• Sensitivity 1.4 V
• Rated Power Output (all channels driven) 75W per CH @ 4 ohms, 75W per CH @ 8 ohms
• Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) 110 dB
• THD (full rated power, 20 Hz - 20 kHz) < 0.05%
• Intermodulation Distortion (from 0 dB down to -30 dB) < 0.05%
• Frequency Response (at 1W, 4/8 ohms) +/- 0.5 dB
• Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB
• Common Mode Rejection (20 Hz to 1 kHz) > 55 dB, typically > 70 dB
• Voltage Gain 25 dB
• DC Offset +/- 20 mV
• Idle Power Consumption (Standard Mode) 15.0W
• Dimensions 1.75" x 19" x 15.19"
• Weight 10 lb./4.54 kg
• Shipping Weight 15 lb./6.8 kg
• IEC Power Connector 15A
| Weight | 11.000000 |
|---|---|
| Length | 21.5 |
| Width | 21 |
| Height | 5 |
| Color | Black |
| Manufacturer | Crown by HARMAN |
| Manufacturer Model Number | CT475 |
| Manufacturer Part Number | CT475 |
| UPC | 871015004754 |
Write Your Own Review