Custom Vertical Power Distribution with 14 Duplex Receptacles (65“ L)
$727.50
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP102860
The PD3A has more circuits and more options than other PD Series models. It contains fourteen AC receptacle positions that can be configured into a large number of multiple circuit designs using standard 20 amp duplex receptacles (NEMA 5/15-20R), 30 amp twist locks (NEMA L5-30R) or other comparable connectors.
Each PD3A is assembled to the specifications determined by the customer. The number of circuits and the receptacles connected to each circuit are determined by the requirements of each project. The wire harness may exit the top or bottom of the chassis. All wires are labeled as to their particular circuit connection as are all AC receptacles.
The locations of the two side mounting brackets can be changed to any of the 9 threaded locations on the back of the chassis. Chassis depth is limited to 2 1/8 inches in order to provide space for rack mounted equipment.
The PD3A is a quick delivery, custom configured product. It is assembled to individual specifications. Yet, standard lead time is short.
The PD3A has fourteen receptacle positions that can house 20 or 30 amp rated connectors, either standard or isolated ground types ("IG"). Optional features include:
Number and orientation of circuits
Length of wire harness
Location of wire harness
Flexible metal conduit
SJT power cords
Special mounting brackets and hardware
Commercial Product Pricing Policy
The Juice Goose line of commercial power distribution products are sold primarily for installation by professional contractors in the commercial audio and video industries. For this reason, retail prices are not published for these items. For additional information on the cost of the PD line, please consult your contractor or contact us for referral to an authorized reseller.
Each PD3A is assembled to the specifications determined by the customer. The number of circuits and the receptacles connected to each circuit are determined by the requirements of each project. The wire harness may exit the top or bottom of the chassis. All wires are labeled as to their particular circuit connection as are all AC receptacles.
The locations of the two side mounting brackets can be changed to any of the 9 threaded locations on the back of the chassis. Chassis depth is limited to 2 1/8 inches in order to provide space for rack mounted equipment.
The PD3A is a quick delivery, custom configured product. It is assembled to individual specifications. Yet, standard lead time is short.
The PD3A has fourteen receptacle positions that can house 20 or 30 amp rated connectors, either standard or isolated ground types ("IG"). Optional features include:
Number and orientation of circuits
Length of wire harness
Location of wire harness
Flexible metal conduit
SJT power cords
Special mounting brackets and hardware
Commercial Product Pricing Policy
The Juice Goose line of commercial power distribution products are sold primarily for installation by professional contractors in the commercial audio and video industries. For this reason, retail prices are not published for these items. For additional information on the cost of the PD line, please consult your contractor or contact us for referral to an authorized reseller.
PD SERIES ADVANTAGES – Each PD Series unit is configured to order with design features specified by the contractor. Standard delivery time is 3 to 5 days for small orders and 2 weeks for larger orders. Contact Juice Goose with specific requirements.
FOUR MODELS – The PD1A is a 63” long strip with twelve duplex receptacles. The 33” PD1B contains six duplex receptacles. The PD3A is 65“ long and can house up to fourteen duplexes or locking connectors. The PD3B has the same connector options as the PD3A in a shorter, 28” long chassis with six receptacle positions.
HARDWARE – Flexible metal “Greenfield” conduit may be specified to house a wire harness. Other conduit options, such as PVC, are available at additional cost. If desired, a threaded fitting can be added to the chassis to fasten to a junction box when the PD is installed. An optional junction box can be supplied by Juice Goose as specified by the contractor.
GROUNDING – Each circuit may be connected to a ground wire separate from the other circuits. Or, a single ground wire can be connected to all circuits. The standard duplex receptacles used in the PD Series are grounded to the chassis. Optionally, isolated ground (“IG”) receptacles may be specified. IG receptacles are not grounded to the chassis. PDs with isolated ground receptacles will have a green / yellow ground wire connected to the receptacles and a ground lug connected to the chassis.
RECEPTACLE SELECTION – The standard receptacles for a PD Series unit are black hybrid 15/20 amp duplex that will fit a fifteen amp or twenty amp plug. Isolated ground receptacles are available in orange. Other colors are available at additional cost. The PD3A and PD3B will accommodate duplexes and either 20 amp or 30 amp twist lock receptacles.
NUMBER AND ARRANGEMENT OF CIRCUITS – The number of circuits in a PD is limited by the percentage of conduit or enclosure space needed for wiring (“fill rate”). Check the fill rate chart on the Juice Goose web site or contact Juice Goose for more information or assistance. The desired arrangement of circuits can be described in the integrator’s design documents or indicated on the Juice Goose PD Series Menu.
WIRE HARNESS AND CONDUIT LENGTH – The PD Series Menu or a similar document can be used to indicate the length of the external wire harness and where it should exit the chassis (top or bottom). The length of any conduit should it be specified as well. Wire lengths over six feet can cause assembly and installation problems. Contact Juice Goose is such wire length is desired.
POWER CORDS - Fifteen, twenty or thirty amp power cords can be specified to connect AC receptacles in the PD to wall power or a UPS. Indicate the amperage and length of the cord.
MOUNTING BRACKETS – The PD1A and PD1B mount with a three inch right angle bracket at the top and bottom of the chassis. Side brackets provide a 21” spacing between mounting points. The PD3A mounts with two, 2 position side mounting brackets that can be attached to the chassis in any of nine different locations. The PD3B has one side bracket which can be mounted in different locations as necessary
Chassis: PD1A: 63”L x 2.5”W x 1.62”D, PD1B: 33”L x 2.5”W x 1.62”D, PD3: 65”L x 3.0”W x 1.72”D, PD3B: 29”L x 3.0”W x 1.72 D
Material: Cold Rolled Steel with Textured Black Powder Coat Finish
Weight (minimum): PD1A: 16 lb., PD1B: 8 lb., PD3: 18 lb., PD3B 8 lb. (Due to the PD1A & PD3A length, minimum dimensional shipping weight is 50 lb.)
Wire Harness Hardware: Threaded Fitting, Conduit and/or Junction Box
Conduit Length: Optional, Specified in Feet
AC Outlets: 20 Amp Duplex, 20 Amp or 30 Amp Locking (PD3A or PD3B)
Max. Number of Circuits: Limited by Fill Rate
Wire Gauge: 12 AWG (20 Amp) or 10 AWG (30 Amp)
Wire Type: Stranded THHN, 600 VAC, 60 Degrees C, Max.
Wire Harness Location: Top or Bottom
Wire Harness Length: Specified in Feet
Mounting Brackets – Distance Between Mounting Locations: PD1A: 21”, PD1B: 21”, PD3: 2 Adjustable Side Brackets, PD3B: 1 Adjustable Side Bracket
Safety Certification: ETL Listed
FOUR MODELS – The PD1A is a 63” long strip with twelve duplex receptacles. The 33” PD1B contains six duplex receptacles. The PD3A is 65“ long and can house up to fourteen duplexes or locking connectors. The PD3B has the same connector options as the PD3A in a shorter, 28” long chassis with six receptacle positions.
HARDWARE – Flexible metal “Greenfield” conduit may be specified to house a wire harness. Other conduit options, such as PVC, are available at additional cost. If desired, a threaded fitting can be added to the chassis to fasten to a junction box when the PD is installed. An optional junction box can be supplied by Juice Goose as specified by the contractor.
GROUNDING – Each circuit may be connected to a ground wire separate from the other circuits. Or, a single ground wire can be connected to all circuits. The standard duplex receptacles used in the PD Series are grounded to the chassis. Optionally, isolated ground (“IG”) receptacles may be specified. IG receptacles are not grounded to the chassis. PDs with isolated ground receptacles will have a green / yellow ground wire connected to the receptacles and a ground lug connected to the chassis.
RECEPTACLE SELECTION – The standard receptacles for a PD Series unit are black hybrid 15/20 amp duplex that will fit a fifteen amp or twenty amp plug. Isolated ground receptacles are available in orange. Other colors are available at additional cost. The PD3A and PD3B will accommodate duplexes and either 20 amp or 30 amp twist lock receptacles.
NUMBER AND ARRANGEMENT OF CIRCUITS – The number of circuits in a PD is limited by the percentage of conduit or enclosure space needed for wiring (“fill rate”). Check the fill rate chart on the Juice Goose web site or contact Juice Goose for more information or assistance. The desired arrangement of circuits can be described in the integrator’s design documents or indicated on the Juice Goose PD Series Menu.
WIRE HARNESS AND CONDUIT LENGTH – The PD Series Menu or a similar document can be used to indicate the length of the external wire harness and where it should exit the chassis (top or bottom). The length of any conduit should it be specified as well. Wire lengths over six feet can cause assembly and installation problems. Contact Juice Goose is such wire length is desired.
POWER CORDS - Fifteen, twenty or thirty amp power cords can be specified to connect AC receptacles in the PD to wall power or a UPS. Indicate the amperage and length of the cord.
MOUNTING BRACKETS – The PD1A and PD1B mount with a three inch right angle bracket at the top and bottom of the chassis. Side brackets provide a 21” spacing between mounting points. The PD3A mounts with two, 2 position side mounting brackets that can be attached to the chassis in any of nine different locations. The PD3B has one side bracket which can be mounted in different locations as necessary
Chassis: PD1A: 63”L x 2.5”W x 1.62”D, PD1B: 33”L x 2.5”W x 1.62”D, PD3: 65”L x 3.0”W x 1.72”D, PD3B: 29”L x 3.0”W x 1.72 D
Material: Cold Rolled Steel with Textured Black Powder Coat Finish
Weight (minimum): PD1A: 16 lb., PD1B: 8 lb., PD3: 18 lb., PD3B 8 lb. (Due to the PD1A & PD3A length, minimum dimensional shipping weight is 50 lb.)
Wire Harness Hardware: Threaded Fitting, Conduit and/or Junction Box
Conduit Length: Optional, Specified in Feet
AC Outlets: 20 Amp Duplex, 20 Amp or 30 Amp Locking (PD3A or PD3B)
Max. Number of Circuits: Limited by Fill Rate
Wire Gauge: 12 AWG (20 Amp) or 10 AWG (30 Amp)
Wire Type: Stranded THHN, 600 VAC, 60 Degrees C, Max.
Wire Harness Location: Top or Bottom
Wire Harness Length: Specified in Feet
Mounting Brackets – Distance Between Mounting Locations: PD1A: 21”, PD1B: 21”, PD3: 2 Adjustable Side Brackets, PD3B: 1 Adjustable Side Bracket
Safety Certification: ETL Listed
| Weight | 18.000000 |
|---|---|
| Length | 71 |
| Width | 16 |
| Height | 6 |
| Color | Black |
| Manufacturer | Juice Goose |
| Manufacturer Part Number | PD3 |
| UPC | 85256000098 9 |
| Size | 65“ L |
Write Your Own Review