DMX PowerPort 375

FEATURES:
Rack-, truss- and wall-mountable
Compact design
DMX/RDM IN and THRU
Built-in DMX/RDM splitter
Hybrid power/data output port
Local test button

SPECIFICATIONS:
PHYSICAL
Width: 220 mm (single or double unit 19” rack-mountable with included rackmount ears)
Height: 44 mm (rack mount 1U)
Depth: 289 mm
Weight: 2.33 kg

CONTROL AND PROGRAMMING
Control Protocols: DMX and RDM
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
DMX/RDM Transceiver IN/THRU: Opto-Isolated RS-485
DMX/RDM Transceiver OUT: Opto-Isolated RS-485
Setting and Addressing of connected fixtures: RDM
Firmware update: over DMX link using Martin Companion

CONTROL/USER INTERFACE
Power output status: Green LED
Data Activity Status: Yellow LED
Fixture Test: Pushbutton to call up test pattern

CONSTRUCTION
Housing: Steel
Color: Matte Black
Protection rating: IP 20
RoHS: Compliant
REACH: Compliant

INSTALLATION
Orientation: Any
Single Unit 19-inch Rackmount: Using supplied short and long rack mounting ears
Dual Unit 19-inch Rackmount: Using supplied coupling plates and short rack mounting ears
Wallmount: Using supplied short rack mounting ears
Trussmount Vertical: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm
Trussmount Horizontal: Using half couplers in supplied short rack mounting ears

CONNECTIONS
AC mains power IN: Neutrik powerCON TRUE1
AC mains power THRU: Neutrik powerCON TRUE1
DMX/RDM IN: Neutrik 5-pin male XLR socket
DMX/RDM THRU: Neutrik 5-pin female XLR socket
Combined power & data out:
Neutrik 4-pin female XLR socket

All connections hot-plugging compatible

ELECTRICAL
AC mains power input: 100-240 V (nominal), 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Maximum permitted total current draw from 48 Vdc OUT at 100-120 V mains power: 5.0 A
Maximum permitted total current draw from 48 Vdc OUT at 173-240 V mains power: 7.5 A
Mains fuses: Double-pole/neutral fusing, 2x T6.3 A (slow-blow), 250 VAC
Maximum total power consumption: 450 W (including full load of connected fixtures)
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 9.6 A
Typical earth-leakage current: 1.7 mA

THERMAL
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 45 °C
Minimum ambient temperature (Ta min.): -20 °C
Typical heat dissipation (calculated, +/- 10%): 300 BTU/hr. (not including connected fixtures, but with system at full load)

APPROVALS
EU safety: IEC/EN60950, IEC/EN62368-1
EU EMC: EN55032, EN55035, EN 61000-3-2, EN 61000-3-3
Australia/NZ: AS/NZS 62368.1:2018
Canadian / US Safety: CAN/CSA-C22.2 No. 62368-1/UL 62368-1
Canadian / US EMC: ICES-003, Class B / FCC 47 CRF § 15 Class B

INCLUDED ITEMS
1 x Safety Cable Attachment Eyelet, incl. screws
2 x Short Rack Mounting Ears, incl. screws
1 x Long Rack Mounting Ear, incl. screws
1 x Coupling Plate, incl. screws
User Manual

Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories below)

SUPPORTED FIXTURES*

Martin VDO Sceptron Family
Martin VDO Fatron Family
Martin VDO Dotron Family
Martin Exterior PixLine Family
Martin Exterior Dot-HP Family
Martin VC-Grid Family
Martin VC-Strip Family
Martin VC-Dot Family (via Martin VC-Feeder)

Quantity of fixtures per DMX PowerPort 375 listed in Capacity Document

ACCESSORIES
Power Input Cables:
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91610174

Power connectors:
Power Connector, Cable Mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789HU
Power Connector, Cable Mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788HU

Power Thru Cables:
Power Relay Cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power Relay Cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power Relay Cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

Installation hardware:
Super Lightweight Half Coupler Rigging Clamp, black (fits M10 threaded hole): P/N 91602018
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

RELATED ITEMS
Martin Companion Cable: P/N 91616091
P3 PowerPort 1500: P/N 90721040
P3 PowerPort 1000 IP Rental: P/N 90721070
P3 PowerPort 1000 IP Install: P/N 90721080
Martin IP66 PSU 240 W: P/N 90760330

ORDERING INFORMATION
DMX PowerPort 375: P/N 90721094