DX410 System 2-Channel 2.4 GHz Base Station for Worldwide Use

FEATURES:
• 2-Channel 2.4 GHz Base Station
• 2-channels of communications
• 2.4 GHz license-free operation
• Supports up to 15 beltpacks in a single system
• 7 kHz wideband audio
• 2-wire and 4-wire bridging on the same system
• 2-wire auto-nulling
• Lost packet concealment
• Simple to set up and configure

SPECIFICATIONS:
Audio
Channels: 2 audio channels
Capacity: Up to 15 BP410 and/or WH410 per base station
Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
Radio Frequency Range: 2400 – 2483.5 MHz
Audio Frequency: 200 Hz – 7 kHz
4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50 dB attenuation, typical
Aux Input: XLR-3F with ¼” (6.35 mm) combo jack, 600 Ohms balanced, level adjustable
Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
Headset Connector: 4-pin mini-DIN, Electret microphone
Headset Output: 200 mW into 32 Ohms
Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
System Distortion: <2%
Communication Security: dual-slot diversity
Transmitter
Type: Frequency Hopping, Spread Spectrum (FHSS)
Transmit Power: 100 mW burst
Modulation Type: Gaussian filtered FSK, TDMA
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
Receiver
Type: Frequency Hopping, Spread Spectrum (FHSS)
RF Sensitivity: <-90 dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
Power Requirements
100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDC
Environmental
Temperature: +32°F – +122°F (0°C – +50°C)
Dimensions
1.75 x 19.0 x 17.13 in
(44 x 483 x 435 mm) (HxWxD)
Weight
9 lb. (4.1 kg)