eDIN DC/LED Driver with 6 Channels
$585.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP17933
Pathway eDIN LED Dimmer/DC Driver provides control over common anode LED fixtures and solid state relays.
The eDIN #1008 provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures—typically string lighting. Multiple modes, including 16-bit, ensure a smooth dimming curve. The module also provides efficient switching control of DC devices such as solid state relays and solenoids.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Controls constant voltage LED fixtures rated between 5 to 30 VDC
• Six PWM outputs, individually fused at 4A
• 6A-fuse model available for use with 12V LED fixtures
• Two spare fuses included
• DMX512-present relay (normally open or normally closed)
• Contact closure ‘panic’ input drives all outputs to full
• Auxiliary 0-10V analog inputs HTP-merged with DMX input
• Indicator LEDs for power, processor, DMX input, active output
• User-adjustable smoothing algorithm
• User-adjustable minimum and maximum output levels
• Multiple loss-of-signal options
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• User-initiated diagnostics and test modes
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
The eDIN #1008 provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures—typically string lighting. Multiple modes, including 16-bit, ensure a smooth dimming curve. The module also provides efficient switching control of DC devices such as solid state relays and solenoids.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Controls constant voltage LED fixtures rated between 5 to 30 VDC
• Six PWM outputs, individually fused at 4A
• 6A-fuse model available for use with 12V LED fixtures
• Two spare fuses included
• DMX512-present relay (normally open or normally closed)
• Contact closure ‘panic’ input drives all outputs to full
• Auxiliary 0-10V analog inputs HTP-merged with DMX input
• Indicator LEDs for power, processor, DMX input, active output
• User-adjustable smoothing algorithm
• User-adjustable minimum and maximum output levels
• Multiple loss-of-signal options
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• User-initiated diagnostics and test modes
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
MODES
• Default LED Control
• DMX Double Precision with Curve
• DMX Double Precision without Curve
• Non-Dim Mode
• Single Channel Control
• Three Channel Mirror with Curve
• Three Channel Mirror without Curve
SPECIFICATIONS
• 4A at 24 VDC per output maximum (96W)
• 1500V opto-isolation between input and output ports
• 250V fault protection on input and output ports
• Input operating voltage: 9-30 VDC
• 5W power consumption
• Operating conditions: 0-50°C; 10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• RoHS 2002/95/EC
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.70 lb. (0.316 kg)
• 3.6” W x 8.0”L x 1.5” H (91 mm x 200 mm x 38 mm)
• Default LED Control
• DMX Double Precision with Curve
• DMX Double Precision without Curve
• Non-Dim Mode
• Single Channel Control
• Three Channel Mirror with Curve
• Three Channel Mirror without Curve
SPECIFICATIONS
• 4A at 24 VDC per output maximum (96W)
• 1500V opto-isolation between input and output ports
• 250V fault protection on input and output ports
• Input operating voltage: 9-30 VDC
• 5W power consumption
• Operating conditions: 0-50°C; 10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• RoHS 2002/95/EC
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.70 lb. (0.316 kg)
• 3.6” W x 8.0”L x 1.5” H (91 mm x 200 mm x 38 mm)
| Weight | 1.000000 |
|---|---|
| Length | 12 |
| Width | 4.5 |
| Height | 2.5 |
| Manufacturer | Pathway Connectivity Solutions |
| Manufacturer Part Number | PWINF DIN PWM4A |
Write Your Own Review