eDIN Demultiplexer with 16 Channel
$585.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP29540
Pathway eDIN Demultiplexer converts DMX512 signals to 0-10 VDC, or other common DC ranges, or to current-sinking control of LED drivers, Mark 7-type fluorescent ballasts, or solid state relays.
The eDIN #1004 converts DMX512 to 16 channels of analog DC output voltage. Diode shunts allow user-selection between current sourcing applications—typically for theatrical dimmers—or current-sinking control—typically for LED fixture driver s or Mark VII electronic fluorescent ballast control. A non-dim mode supports solid-state relay control.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Indicator LEDs for power, processor, and DMX input status
• Standard DC output modes of 0-10V, 0-15V, 0-2.5V, or 0-5V
• Custom mode allows user-set minimum and maximum DC output up to 16V
• EFBC/LED Driver mode allows single DMX channel control of mains voltage (via SSR) and 0-10V dimming
• Maximum current rating per output of 10 mA (sourcing) or 30 mA (sinking)
• CCL “Panic Input” drives all outputs to full
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
The eDIN #1004 converts DMX512 to 16 channels of analog DC output voltage. Diode shunts allow user-selection between current sourcing applications—typically for theatrical dimmers—or current-sinking control—typically for LED fixture driver s or Mark VII electronic fluorescent ballast control. A non-dim mode supports solid-state relay control.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• Indicator LEDs for power, processor, and DMX input status
• Standard DC output modes of 0-10V, 0-15V, 0-2.5V, or 0-5V
• Custom mode allows user-set minimum and maximum DC output up to 16V
• EFBC/LED Driver mode allows single DMX channel control of mains voltage (via SSR) and 0-10V dimming
• Maximum current rating per output of 10 mA (sourcing) or 30 mA (sinking)
• CCL “Panic Input” drives all outputs to full
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Data and power easily daisy-chained between modules
• Termination switch
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
MODES
• 0 - 10 VDC Output
• 0 - 5 VDC Output
• 0 - 015 VDC Output
• 0 - 2.5 VDC Output
• Custom Output - user set MIN and MAX output levels between 0 - 16 VDC
• Electronic Fluorescent Ballast/LED Driver Control (10% threshold)
• Non-Dim
• Electronic Fluorescent Ballast/LED Driver Control (1% threshold)
SPECIFICATIONS
• 1500V opto-isolation between input and output ports
• 250V fault protection on input and output ports
• Input operating voltage: 9-30 VDC
• 6W power consumption
• Operating conditions: -10° to 45°C; 10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• ANSI E1.3 0-10V Analog Control (with diodes shunts on)
• ANSI C82.11 Fluorescent Ballast Control (diode shunts off)
• RoHS 2011/65/EU
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.70 lb. (0.316 kg)
• 3.6” W x 6.25”L x 1.5” H (91 mm x 160 mm x 38 mm)
• 0 - 10 VDC Output
• 0 - 5 VDC Output
• 0 - 015 VDC Output
• 0 - 2.5 VDC Output
• Custom Output - user set MIN and MAX output levels between 0 - 16 VDC
• Electronic Fluorescent Ballast/LED Driver Control (10% threshold)
• Non-Dim
• Electronic Fluorescent Ballast/LED Driver Control (1% threshold)
SPECIFICATIONS
• 1500V opto-isolation between input and output ports
• 250V fault protection on input and output ports
• Input operating voltage: 9-30 VDC
• 6W power consumption
• Operating conditions: -10° to 45°C; 10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• ANSI E1.3 0-10V Analog Control (with diodes shunts on)
• ANSI C82.11 Fluorescent Ballast Control (diode shunts off)
• RoHS 2011/65/EU
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.70 lb. (0.316 kg)
• 3.6” W x 6.25”L x 1.5” H (91 mm x 160 mm x 38 mm)
| Weight | 0.900000 |
|---|---|
| Length | 12 |
| Width | 4.5 |
| Height | 2.5 |
| Manufacturer | Pathway Connectivity Solutions |
| Manufacturer Part Number | PWINF DIN D2A |
Write Your Own Review