IP66 PSU 240 W (Replaces Tripix Power IP66)

FEATURES:
IP66-rated
Wall-mountable
Can be located up to 50 m (164 ft.) away from the creative LED video products
No configuration or addressing required

SPECIFICATIONS:
PHYSICAL
Length: 314 mm (12.4 in.)
Width: 68 mm (2.7 in.)
Height: 39 mm (1.5 in.)
Weight: 1.5 kg (3.3 lb.)

SYSTEM INTEGRATION

Exterior PixLine family
Exterior Dot-HPTM family
VDO Sceptron family
VC-Dot family via VC-Feeder
VC-Grid family (indoor product)
VC-Strip family (indoor product)
Tripix family

CONSTRUCTION
Housing: Aluminum
Finish: Clear anodized
Protection rating: IP66, NEMA 4X
RoHS compliant

INSTALLATION
Mounting: Fixation points for surface-mounting
Orientation: Any
Maximum cable length: See connected product user manuals
Maximum number of connected fixtures: See connected product user manuals

CONNECTIONS
AC power input: 100-240 V nominal, 50/60 Hz

48 VDC power output:
To Tripix: Power Inserter Cable, Martin IP66 PSU 240 W to Tripix system, 0.25 m (9.8 in.), P/N 91611339
To VDO Sceptron: Input Y-Cable, XLR5 + Martin IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
To Exterior PixLine: Input Y-Cable, XLR5 + Martin IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
To Exterior Dot-HP: Input Y-Cable, XLR5 + Martin IP66 PSU 240W to BBD, 0.25 m (9.8 in.), P/N 91616050
To VC-Grid: Input Y-Cable, XLR5 + Martin IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N 91616039
To VC-Strip: Input Y-Cable, XLR5 + Martin IP66 PSU to XLR4, 0.25 m (9.8 in.), P/N 91616039
To VC-Feeder (VC-Dot): Input Y-Cable, XLR5 + Martin IP66 PSU 240W to IP65 connector, 0.25 m (9.8 in.), P/N 11840195

See user manuals of compatible products for latest complete information on suitable cables and connectors, safety limits, etc.

ELECTRICAL
AC mains power input: Hard-wired (terminal block) via cable gland
Power supply unit: Auto-sensing multi-voltage switch-mode
DC power output: 48 V
Maximum DC output power: 240 W
Maximum DC output current draw: 5 A
Protection: Overvoltage, overcurrent, short circuit, over-temperature, all with auto-recovery

THERMAL
Cooling: Convection
Maximum ambient temperature (Ta max.): 45° C (113° F)
Minimum ambient temperature (Ta min.): -30° C (-22° F)
Maximum surface temperature, steady state, at 45° C ambient: 80° C (176° F)
Total heat dissipation (calculated, including max. number of connected devices, all at full load): 820 BTU/hr.

APPROVALS
EU safety: EN 60598-2-6, EN 61347-2-13
EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1012
Canadian safety: CSA C22.2 No. 107.1
Australia/NZ: RCM

ACCESSORIES
Power Inserter Cable, Martin IP66 PSU 240 W to Tripix system: P/N 91611339
Input Y-Cable, 5-pin XLR + Martin IP66 PSU 240W to BBD, 0.25m (9.8 in.): P/N 91616050
Input Y-Cable, 5-pin male XLR + Martin IP66 PSU 240W to 4-pin fem. XLR, 0.25 m (9.8 in.): P/N 91616039
Input Y-Cable, 5-pin male XLR + Martin IP66 PSU 240W to IP65, 0.25 m (9.8 in.): P/N 11840195

ORDERING INFORMATION
Martin IP66 PSU 240 W (replaces Tripix Power IP66): P/N 90760330