MEB 114-S SpeechLine Wired On-Table Boundary Microphone with Programmable Button,Bicolor LED Ring - White
$359.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP111763
Wired table boundary microphone with half-cardioid pickup pattern. Thanks to its sturdy housing and high-quality microphone capsule, the MEB-S 114 guarantees optimum speech intelligibility. The MEB 114-S has a programmable microphone button (PTT, PTM, Toggle on/off, Permanent on) and a two-color LED ring as a status indicator. The TTL logic output on the underside can be used to activate a camera or media control system. The model is available in black and white color.
The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bicolor LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Microphone modes
• Toggle on/off
• Push to mute
• Push to talk
• Permanent on (external LED control)
The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bicolor LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Microphone modes
• Toggle on/off
• Push to mute
• Push to talk
• Permanent on (external LED control)
Specifications
LED light ring: red / green
Dimensions: 3.34 x 3.93 x 0.98 in (W x D x H)
Connector: clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
Frequency response: 40 Hz – 20 kHz
Max. sound pressure level: 140 dB
Transducer principle: pre-polarized condenser microphone
Weight: 10.26 oz
Pickup pattern: cardioid
Nominal impedance: 200 O
Phantom powering: P 24 - P 48
Operating temperature: 14 ° to 122 ° F
Equivalent noise level: 29 dB (A)
Equivalent noise level weighted as per CCIR: 39 dB (CCIR)
Current consumption: 5.3 mA
Output voltage: Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V
Output voltage: Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
Acoustics: boundary layer microphone
Dynamic range: 111 dB (A)
Sensitivity: 10 mV/Pa
What's in the Box
MEB 114 Microphone
Quick Guide
Cable
LED light ring: red / green
Dimensions: 3.34 x 3.93 x 0.98 in (W x D x H)
Connector: clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
Frequency response: 40 Hz – 20 kHz
Max. sound pressure level: 140 dB
Transducer principle: pre-polarized condenser microphone
Weight: 10.26 oz
Pickup pattern: cardioid
Nominal impedance: 200 O
Phantom powering: P 24 - P 48
Operating temperature: 14 ° to 122 ° F
Equivalent noise level: 29 dB (A)
Equivalent noise level weighted as per CCIR: 39 dB (CCIR)
Current consumption: 5.3 mA
Output voltage: Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V
Output voltage: Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
Acoustics: boundary layer microphone
Dynamic range: 111 dB (A)
Sensitivity: 10 mV/Pa
What's in the Box
MEB 114 Microphone
Quick Guide
Cable
| Weight | 1.120000 |
|---|---|
| Length | 205 |
| Width | 170 |
| Height | 58 |
| Color | White |
| Manufacturer | Sennheiser |
| Manufacturer Model Number | MEB 114-S W |
| Manufacturer Part Number | 505616 |
| UPC | $615,104,230,408 |
Write Your Own Review