P3 PowerPort 1500 Indoor Power and Data Unit for Martin Creative LED

FEATURES:
P3 image processing technology
Setup and addressing via P3 System Controller family
P3 input and thru to allow daisy-chaining
4 hybrid power/data output ports
Wall-, truss- and rack-mountable
Can be located up to 50 m away from the creative LED video products

SPECIFICATIONS:
PHYSICAL
Width: 482 mm (19.0 in.)
Height: 88 mm (3.5 in.) rackmount 2U
Depth: 335 mm (13.2 in.)
Weight: 10 kg (22.1 lb.)

CONTROL AND PROGRAMMING
Addressing and status: Via P3 System Controller
Mapping: Via P3 System Controller
Firmware update: Via P3 System Controller

CONTROL/USER INTERFACE
Device status: Multicolor status LED
Power output status: Four LEDs
Data output status: Four LEDs
Device test and reset: Pushbutton to call up local test patterns and reset device

P3 SIGNAL PROTOCOL
Signal type: Gigabit Ethernet
Protocol: Proprietary Martin P3
Hot pluggable: Yes, electrically isolated at all connections
Cable type: Ethernet, CAT 5e or better
Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

SYSTEM INTEGRATION

VC-Dot family via VC-Feeder
Exterior PixLine family
VDO Sceptron family
VC-Grid family
VC-Strip family
Exterior Dot-HP family

CONSTRUCTION
Housing: Steel and aluminum
Color: Matte black
Protection rating: IP20

INSTALLATION
Mounting: 19-inch rackmount, wall mount, flown from rigging clamps

CONNECTIONS
Power input: Neutrik powerCON
P3 data in/out: Two Neutrik etherCON RJ-45 sockets
Combined power & data out: Four 4-pin female XLR sockets (hybrid power & data cable)

ELECTRICAL
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Typical total power consumption: 1540 W (including full load of connected display devices, all at full intensity)
Main fuse: 10 AT (slow blow) x 4

THERMAL
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 45° C
Minimum ambient temperature (Ta min.): -20° C
Total heat dissipation (calculated, +/- 10%): 530 BTU/hr. (not including display devices but with system at full load) APPROVALS
APPROVALS
EU safety: EN 60950
EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
US safety: ANSI/UL 60950-1
Canadian safety: CSA C22.2 No. 60950-1

INCLUDED ITEMS
Mounting brackets incl. screws
Safety cable attachment eyelet

Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories)

ACCESSORIES
Air Filters 60x60, Set of 10: P/N 50404543

Power Connector:
Power Connector powerCON Female: P/N 91611794

Power Cables:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)

Rigging hardware:
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

RELATED ITEMS
Martin P3-050 System Controller: P/N 90721090
Martin P3-100 System Controller: P/N 90721010
Martin P3-150 System Controller: P/N 90721015
Martin P3-200 System Controller: P/N 90721020
Martin P3-300 System Controller: P/N 90721060
Martin P3-PC System Controller: Free download from martin.com

ORDERING INFORMATION
Martin P3 PowerPort 1500: P/N 90721040