Pathway Contact Closure with 12 Relays, eDIN (8")
$650.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP95547
Pathway eDIN Contact Closure interface provides twelve DMX-controlled dry contact closures for both power and signal level switching.
The eDIN #1003 provides DMX512 control over twelve form-C relays, for signal level switching, in a DIN-rail mountable format. Each relay may be independently wired for normally-open (NO) or normally closed (NC) operation. Field configurable through front panel or by RDM, the #1003 has nine operating modes for maximum flexibility of use.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• DMX512-present relay (normally open or normally closed)
• Indicator LEDs for power, processor, DMX input, and relay status
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• Normally open or normally closed wiring option for each relay
• User-adjustable trigger threshold (default to 50%)
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Suitable as pilot relay for high voltage contactors, with adequate arc protection (by others)
• Data and power easily daisy-chained between modules
• Termination switch
• User-initiated diagnostics and test modes
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
The eDIN #1003 provides DMX512 control over twelve form-C relays, for signal level switching, in a DIN-rail mountable format. Each relay may be independently wired for normally-open (NO) or normally closed (NC) operation. Field configurable through front panel or by RDM, the #1003 has nine operating modes for maximum flexibility of use.
FEATURES
• DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
• DMX512-present relay (normally open or normally closed)
• Indicator LEDs for power, processor, DMX input, and relay status
• Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
• Normally open or normally closed wiring option for each relay
• User-adjustable trigger threshold (default to 50%)
• One DMX512-A/RDM data input connection
• One passive DMX512-A data through connection
• Suitable as pilot relay for high voltage contactors, with adequate arc protection (by others)
• Data and power easily daisy-chained between modules
• Termination switch
• User-initiated diagnostics and test modes
• Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
MODES
• 12 Channel Maintained
• 12 Channel Momentary
• 12 Channel Momentary "ON"
• 6 Channel Momentary Split
• 6 Channel Maintained Split
• 12 Channel Momentary Split with Secondary "Reset"
• Chase
• Single Channel Select
• Single Channel Build
SPECIFICATIONS
• Relays rated for minimum 100,000 operations at 2A at 30 VDC
• 1500V opto-isolation between DMX input and module electronics
• 250V fault protection on DMX input
• Input operating voltage: 9-30 VDC
• 6W power consumption
• Operating conditions: 0-50°C; 10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• RoHS 2011/65/EU
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.70 lb. (0.316 kg)
• 3.6” W x 8.0”L x 1.5” H (91 mm x 200 mm x 38 mm)
• 12 Channel Maintained
• 12 Channel Momentary
• 12 Channel Momentary "ON"
• 6 Channel Momentary Split
• 6 Channel Maintained Split
• 12 Channel Momentary Split with Secondary "Reset"
• Chase
• Single Channel Select
• Single Channel Build
SPECIFICATIONS
• Relays rated for minimum 100,000 operations at 2A at 30 VDC
• 1500V opto-isolation between DMX input and module electronics
• 250V fault protection on DMX input
• Input operating voltage: 9-30 VDC
• 6W power consumption
• Operating conditions: 0-50°C; 10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• RoHS 2011/65/EU
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.70 lb. (0.316 kg)
• 3.6” W x 8.0”L x 1.5” H (91 mm x 200 mm x 38 mm)
| Weight | 1.000000 |
|---|---|
| Length | 12 |
| Width | 4.5 |
| Height | 2.5 |
| Manufacturer | Pathway Connectivity Solutions |
| Manufacturer Model Number | 1003 |
| Manufacturer Part Number | PWINF DIN CC |
| Size | 8" |
Write Your Own Review