SM35 Performance Headset Condenser Microphone with XLR Connector
$159.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP70172
The SM35 Performance Headset Condenser Microphone gives multi-instrumentalists the freedom to express themselves without sacrificing sound quality. A tight, unidirectional cardioid polar pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed onstage, whether in use in small clubs, large installations, or arena tours.
FEATURES
Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
Flexible gooseneck design allows for optimized placement that further improves source isolation
Lightweight and low-profile form enables comfortable, long-wearing use
Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound
Tailored frequency response refined for clear, crisp vocal reproduction
Legendary Shure precision engineering for durability and performance
Weight (g) / (lb.): 72 g / 0.159 lb.
Transducer Type: Condenser
Polar Pattern: Cardioid
Frequency Range From (Hz): 50
Frequency Range To (kHz): 20
Sensitivity dBV/Pa: -59.00
Sensitivity mvpa: 1.10
Equivalent Self-noise: 39 dB(A)
Maximum Sound Pressure: 153.0 dB
Impedance (O): 2400
Switchable Low Cut: no
Output Connectors: 3 Pin XLR, TQG (TA4F, 4-Pin Mini)
Attenuation PAD: no
Interchangeable Capsule: no
Requires Phantom Power (VDC): TQG: 5v DC (bias), XLR: 11 to 52 VDC
Cable: 1.1 m / 45 in
Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
Flexible gooseneck design allows for optimized placement that further improves source isolation
Lightweight and low-profile form enables comfortable, long-wearing use
Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound
Tailored frequency response refined for clear, crisp vocal reproduction
Legendary Shure precision engineering for durability and performance
Weight (g) / (lb.): 72 g / 0.159 lb.
Transducer Type: Condenser
Polar Pattern: Cardioid
Frequency Range From (Hz): 50
Frequency Range To (kHz): 20
Sensitivity dBV/Pa: -59.00
Sensitivity mvpa: 1.10
Equivalent Self-noise: 39 dB(A)
Maximum Sound Pressure: 153.0 dB
Impedance (O): 2400
Switchable Low Cut: no
Output Connectors: 3 Pin XLR, TQG (TA4F, 4-Pin Mini)
Attenuation PAD: no
Interchangeable Capsule: no
Requires Phantom Power (VDC): TQG: 5v DC (bias), XLR: 11 to 52 VDC
Cable: 1.1 m / 45 in
| Weight | 0.700000 |
|---|---|
| Length | 6 |
| Width | 7 |
| Height | 2.75 |
| Color | Black |
| Manufacturer | Shure |
| Manufacturer Model Number | SM35-XLR |
| Manufacturer Part Number | SM35-XLR |
| UPC | 42406365673 |
Write Your Own Review