Source 4WRD II PARNel Fixture Body - Black

FEATURES


• Fixture bodies for use with Source 4WRD II LED Retrofit
• Works just like a Source Four PAR or PARNel, using the same accessories
• 155 W at full output
• Brighter than the 750 W HPL versions
• Uses same Source 4WRD II LED as the Source 4WRD ellipsoidal


SOURCE 4WRD PAR AND PARNel FIXTURE BODIES SHIP WITH:

• Color frame
• PAR ships with AR coated flat lens (other lenses sold separately)
• PARNel ships with PARNel lenses


Source

LED details S4WRD II LED *Not Included*
Max. lumens 11,584 (PAR), 10,786 (PARNel) w/ S4WRD II
Lumens per watt 77 (PAR), 72 (PARNel)
L70 rating (hours to 70% output)>45,000 hours (LM84 test pending)
Notes S4WRD II LED sold separately


Color


Colors used - Warm or Cool White
Color temperature range - 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
Calibrated array - NA
Red shift - No
Notes - S4WRD is available in 80+ CRI (Standard) and 90+
• CRI (Gallery) - See S4WRD datasheet for details


Optical

Beam angle range - PAR: 19.5–62 degrees PARNel: 25–46 degrees
Gate size - N/A
Aperture size - 178 mm (7 in)
Pattern projection - No
Pattern size - N/A
Camera flicker control/Hz range - No
Notes - PAR ships with an AR coated flat lens. Additional
• PAR lenses sold separately.
• PARNel ships with PARNel lenses.


Control

Input method - Line Voltage with DMX Control or Line Dimmed
Protocols - DMX via RJ45 connector
Modes (Footprint)1
RDM configuration - Yes
UI type - 7-segment address display
Local control - Yes
Onboard presets - No
Onboard sequences - No
Onboard effects - No
Fixture to fixture control - No
Notes - Local level control via UI


Electrical

Voltage range - 114–125 V, 60 Hz (120 VAC)
• • - 209–252 V, 50 Hz (230 VAC)

Input method - Hard wired, 1 m cord, Edison plug (120 VAC)
• • Hard wired, 1 m cord, bare end (230 VAC)

Inrush - 30 A (first half-cycle) at 120 VAC
• 12 A (first half-cycle) at 230 VAC

Fixtures per circuit - 120 VAC: 14 fixtures per 20 A switched circuit (R20 module or similar)
• 230 VAC: 6 fixtures per non-dimmed circuit (ER15AFR module)

Wattage (Typical/Standby) - 150 W / 1.2 W (120 VAC)
• 175 W / 3.7 W (230 VAC)

Current draw - 1.26 A at 120 VAC
• • 0.75 A at 230 VAC

Notes - When using line dimming, see the S4WRD manual for dimmer setup.
• When using line dimming, standby power is 0 W


Thermal

Ambient operating temp - 5°–50° C (41°–122° F)

Fan (controllable) - Yes (no)

Droop compensation - No

dB range - 28 dBa (average at 1 m)

BTUs/hour - 529 (120 VAC)
• 597 (230 VAC)

Physical

Materials - Die-cast aluminum

Color options - Black, white, silver or custom color

Mounting options - Yoke

IP rating - IP-20

Weight - PAR: 3 kg (6.6 lb.) / PARNel: 3.5 kg (7.7 lb.)

Included accessories - Color frame

Notes - Includes S4WRD mounting post.
• Requires the S4WRD II LED available separately