Web-Based AC Power Controller in Slim Chassis with Replaceable Surge Protection (15 Amps)
$445.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP102847
The Juice Goose iP 50 is a web based power distribution device with AC power protection that can be accessed via Ethernet connection. With this remote access, two individual AC receptacles can be turned on and off independently. The iP 50 has a fifteen amp capacity.
The iP 50 can be controlled by the on board web server graphic interface (GUI) that can be accessed by any web browser. It can also be remote controlled by TCP/IP or UDP connection to commercial or proprietary control systems.
ECONOMICAL FEATURES AND FUNCTIONS
The iP 50 chassis measures only 1.75” H x 9.0” W x 9.5” D and weighs only five pounds. Side mounting flanges and a detachable power cord make installation convenient.
It features high quality, all steel construction as well as the most important features needed for web based remote control.
On board web server (GUI), TCP/IP or UDP remote control
Easy set up
Front panel indicators for network connection and outlets on
Administrator and User login options
Automatic Power Cycle to reboot a network data router if network connection is lost
AC line surge protection
Using third party programs the iP 50 can be scheduled to turn on and off at specific times. Also, its outlets can be sequenced on and off if required for application in audio systems. This remote control can also be used to reboot DSPs or other processor based electronics as well as to save energy costs by scheduling electronic equipment to turn off when not in use.
WEB SERVER
All iP Series products have an on board web server that provides graphic user interface for controlling equipment connected to the iP Series unit. This feature is available for remote use as soon as the IP address of the unit is entered in a web browser.
TCP / IP CONTROL
It is possible to control and monitor iP 50 over Ethernet using raw TCP protocol. In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP 50 over a TCP/IP connection using a suitable TCP/IP client program. Once the connection is made, the console commands are available to the user over TCP/IP as if the user was connected to iP 50 over the local serial connection.
LOCAL MONITORING
There are four LED lights on the front of the iP 50 chassis. Two lights indicate which of the two Power Pods have been turned on. One light indicates that the iP 50 is plugged into electric power and connected to an active data network. This light will blink in the event of a network disconnection or failure. A fourth light indicates the status of AC line surge protection.
REPLACEABLE POWER PROTECTION
The iP 50 protects against AC power line surges between hot and neutral without ground line contamination. This protection component is not sacrificial. However, should that component be damaged as a result of exposure to extended over voltage or some other catastrophic event, the protection status LED will go off. In that event, the iP 50 can be serviced to replace the surge protection component. See the iP 50 manual for warnings and instructions.
The iP 50 can be controlled by the on board web server graphic interface (GUI) that can be accessed by any web browser. It can also be remote controlled by TCP/IP or UDP connection to commercial or proprietary control systems.
ECONOMICAL FEATURES AND FUNCTIONS
The iP 50 chassis measures only 1.75” H x 9.0” W x 9.5” D and weighs only five pounds. Side mounting flanges and a detachable power cord make installation convenient.
It features high quality, all steel construction as well as the most important features needed for web based remote control.
On board web server (GUI), TCP/IP or UDP remote control
Easy set up
Front panel indicators for network connection and outlets on
Administrator and User login options
Automatic Power Cycle to reboot a network data router if network connection is lost
AC line surge protection
Using third party programs the iP 50 can be scheduled to turn on and off at specific times. Also, its outlets can be sequenced on and off if required for application in audio systems. This remote control can also be used to reboot DSPs or other processor based electronics as well as to save energy costs by scheduling electronic equipment to turn off when not in use.
WEB SERVER
All iP Series products have an on board web server that provides graphic user interface for controlling equipment connected to the iP Series unit. This feature is available for remote use as soon as the IP address of the unit is entered in a web browser.
TCP / IP CONTROL
It is possible to control and monitor iP 50 over Ethernet using raw TCP protocol. In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP 50 over a TCP/IP connection using a suitable TCP/IP client program. Once the connection is made, the console commands are available to the user over TCP/IP as if the user was connected to iP 50 over the local serial connection.
LOCAL MONITORING
There are four LED lights on the front of the iP 50 chassis. Two lights indicate which of the two Power Pods have been turned on. One light indicates that the iP 50 is plugged into electric power and connected to an active data network. This light will blink in the event of a network disconnection or failure. A fourth light indicates the status of AC line surge protection.
REPLACEABLE POWER PROTECTION
The iP 50 protects against AC power line surges between hot and neutral without ground line contamination. This protection component is not sacrificial. However, should that component be damaged as a result of exposure to extended over voltage or some other catastrophic event, the protection status LED will go off. In that event, the iP 50 can be serviced to replace the surge protection component. See the iP 50 manual for warnings and instructions.
GENERAL DESCRIPTION
The Juice Goose iP 50 and iP 50-RX are slim line, micro controller based power distribution devices that can be accessed via Internet communications using on board web server (GUI), TCP/IP or UDP connection. With this remote access, individual AC receptacles can be turned on and off. Each model has a fifteen amp capacity. The iP 50 provides a base level of surge protection. The iP 50-RX features the proven, highly effective RX Series surge protection technology.
FEATURES
These products feature high quality design and construction as well as the most important functions needed for web based remote control. Two of the three AC outlets are individually controllable as “Pod1” and “Pod 2”. The third receptacle is always on when the unit is plugged in. The 1.75 inch chassis fits behind video displays or in other narrow spaces and mounts easily with the two side flanges. Each unit has a 15 amp circuit breaker and a detachable power cord with a right angle plug.
COMMUNICATION AND CONTROL
All the functions of the iP 50 can be accessed through the RJ 45, Ethernet port on the chassis. An on-board web server gives the product immediate Internet functionality through a graphic interface that can be accessed via a web browser. Or the iP 50 can be controlled using simple text based commands using a third party control system. Interface links have been developed for Crestron, Extron and other audio-video controllers.
The Power Cycle feature can be set to “ping” a specified web site and to automatically turn a power Pod off and on to reboot a network data router if network communication is lost.
SURGE PROTECTION
The iP 50 features a replaceable component which protects against surges between line and neutral. Power protection status, indicated by an LED on the front panel of the iP 50, is functioning so long as that LED is lighted. When the LED goes out, the unit may be disconnected from power, opened and serviced to replace the surge protection component.
SURGE PROTECTION
iP 50-RX Juice Goose RX Series power protection technology is particularly valuable because it works against common mode (ground line) as well as normal mode events. While common mode surges and disturbances don’t typically cause catastrophic damage, they can result in operating failures and improper performance of digital processing equipment.
Compared with the low operating voltage of processor logic, a power anomaly of even 1 or 2 volts on data lines or logic ground can cause problems. That’s why the RX Series products have a voltage surge let through of only 1/2 volt between neutral and ground. These products also protect against more dramatic events. Connected equipment is safe from surges up to 6,000 volts at 3,000 amps on hot, neutral and ground.
The iP 50-RX design also includes protection from external wiring faults including hot-neutral reversal, missing ground and over voltage. LEDs on the chassis indicate when surge protection is functioning and when there is an external wiring fault that prevents power output.
DETAIL SPECIFICATIONS
Chassis: 16 gauge steel
Dimensions (including mounting flange): 1.75”H x 9”W x 9.5”D
Weight iP 50: 5 lb.
iP 50-RX: 6 lb.
Circuit Breaker (thermal): 15A
Technical Current Rating: 12A
Number of Addressable Power Pods: Two
Number of Unswitched Outlets: One
Power Input: Detachable NEMA 18 AWG power cord with right angle plug
Power Output: Three NEMA 5/15R: two addressable, one unswitched
Input Voltage: 120 VAC @ 60 Hz
Signal Connection: Ethernet (RJ-45)
Network Communication: On board web server (GUI), TCP/IP or UDP
LED Indicators: network, surge protection, external fault (RX model only) and pod status (2)
The Juice Goose iP 50 and iP 50-RX are slim line, micro controller based power distribution devices that can be accessed via Internet communications using on board web server (GUI), TCP/IP or UDP connection. With this remote access, individual AC receptacles can be turned on and off. Each model has a fifteen amp capacity. The iP 50 provides a base level of surge protection. The iP 50-RX features the proven, highly effective RX Series surge protection technology.
FEATURES
These products feature high quality design and construction as well as the most important functions needed for web based remote control. Two of the three AC outlets are individually controllable as “Pod1” and “Pod 2”. The third receptacle is always on when the unit is plugged in. The 1.75 inch chassis fits behind video displays or in other narrow spaces and mounts easily with the two side flanges. Each unit has a 15 amp circuit breaker and a detachable power cord with a right angle plug.
COMMUNICATION AND CONTROL
All the functions of the iP 50 can be accessed through the RJ 45, Ethernet port on the chassis. An on-board web server gives the product immediate Internet functionality through a graphic interface that can be accessed via a web browser. Or the iP 50 can be controlled using simple text based commands using a third party control system. Interface links have been developed for Crestron, Extron and other audio-video controllers.
The Power Cycle feature can be set to “ping” a specified web site and to automatically turn a power Pod off and on to reboot a network data router if network communication is lost.
SURGE PROTECTION
The iP 50 features a replaceable component which protects against surges between line and neutral. Power protection status, indicated by an LED on the front panel of the iP 50, is functioning so long as that LED is lighted. When the LED goes out, the unit may be disconnected from power, opened and serviced to replace the surge protection component.
SURGE PROTECTION
iP 50-RX Juice Goose RX Series power protection technology is particularly valuable because it works against common mode (ground line) as well as normal mode events. While common mode surges and disturbances don’t typically cause catastrophic damage, they can result in operating failures and improper performance of digital processing equipment.
Compared with the low operating voltage of processor logic, a power anomaly of even 1 or 2 volts on data lines or logic ground can cause problems. That’s why the RX Series products have a voltage surge let through of only 1/2 volt between neutral and ground. These products also protect against more dramatic events. Connected equipment is safe from surges up to 6,000 volts at 3,000 amps on hot, neutral and ground.
The iP 50-RX design also includes protection from external wiring faults including hot-neutral reversal, missing ground and over voltage. LEDs on the chassis indicate when surge protection is functioning and when there is an external wiring fault that prevents power output.
DETAIL SPECIFICATIONS
Chassis: 16 gauge steel
Dimensions (including mounting flange): 1.75”H x 9”W x 9.5”D
Weight iP 50: 5 lb.
iP 50-RX: 6 lb.
Circuit Breaker (thermal): 15A
Technical Current Rating: 12A
Number of Addressable Power Pods: Two
Number of Unswitched Outlets: One
Power Input: Detachable NEMA 18 AWG power cord with right angle plug
Power Output: Three NEMA 5/15R: two addressable, one unswitched
Input Voltage: 120 VAC @ 60 Hz
Signal Connection: Ethernet (RJ-45)
Network Communication: On board web server (GUI), TCP/IP or UDP
LED Indicators: network, surge protection, external fault (RX model only) and pod status (2)
| Weight | 5.000000 |
|---|---|
| Length | 10 |
| Width | 10 |
| Height | 3 |
| Color | Black |
| Manufacturer | Juice Goose |
| Manufacturer Part Number | iP-50 |
| UPC | 85256000089 7 |
| Size | 15 Amps |
Write Your Own Review