Web-Based AC Power Controller with RX Surge Protection and Line Filtration (15 Amps)
$971.00
Ships Directly from Manufacturer. Contact Us for Availability.
SKU
SP102844
The iP 1515-RX combines micro controller based power management with the proven performance of Juice Goose RX Series surge protection and filtration.
This product can be accessed via internet or intranet communications using Ethernet or RS232 connection so that individual AC receptacles can be turned on and off and monitored for electrical current flow.
The iP 1515-RX provides local, intranet or Internet based power control to six receptacles grouped into three individual Power Pods.
Each of these Pods can be turned on and off individually. In addition, current draw can be monitored from 0.2 to 20.0 amps per power POD.
FEATURES AND FUNCTIONS
The iP 1515-RX features high quality design, proven power protection and the most important features needed for AC power control and monitoring.
Local, intranet and Internet power control
Local fail safe sequencing and manual override
On-board web server for easy set up, control, sequencing and monitoring
Front panel indicators for network connection and outlets on
Amperage monitoring from 0.20 to 20.0 amps per power POD
Administrator and User login options
Automatic Power Cycle to reboot a network data router if network connection is lost
Available Crestron control module
Ten volt maximum line to neutral voltage surge
One half volt maximum ground line voltage surge
Transient Energy Absorption of 1,020 Joules
AC line filtration of 60 DB to 80 DB @ 30 MHz
Using third party programs the iP 1515-RX can be scheduled to turn on and off at specific times.
Also, its outlets can be sequenced on and off if required for application in audio systems.
This remote control can also be used to reboot DSPs or other processor based electronics as well as to save energy costs by scheduling electronic equipment to turn off when not in use.
WEB SERVER
All iP Series products have an on board web server that provides graphic user interface for controlling and monitoring equipment connected to the iP Series unit.
This feature is available for remote use as soon as the IP address of the unit is entered in a web browser.
TCP / IP CONTROL
It is possible to control and monitor iP-1515-RX over Ethernet using raw TCP protocol.
In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP-1515-RX over a TCP/IP connection using a suitable TCP/IP client program.
Once the connection is made, the console commands are available to the user over TCP/IP as if the user was connected to IP-1515-RX over the local serial connection.
RS232 CONTROL
The RJ11 style connector on the back of the iP1515-RX chassis (labeled "RS232") can be used for remote control of this unit via RS232 protocol over distances of no more than 50 feet. Commands for this control are detailed in the iP 1520-RX Manual in the section titled "RS232 Control and Monitoring".
Operation and status of the iP 1515-RX and connected equipment can be observed in several ways.
Each of three lights on the front of the iP 1515-RX turn on to indicate which of the three Power Pods have been turned on.
A fourth LED indicates power on and active data network communications.
By way of the on board web server or an appropriate third party interface, each of the three Power Pods can be monitored to determine if connected equipment is on and consuming power.
SNMP
Juice Goose developed an SNMP enabled subset of the iP Series products. Those models can be addressed with SNMP or RS232 protocol but lack some of the features of the standard iP Series models.
For additional information, click here.
POWER CONDITIONING
The iP 1515-RX provides best of breed AC line protection and filtration across hot, neutral and ground.
Published test results prove the effectiveness of the power protection circuitry contained in the iP 1515-RX and other RX Series products. Click here for test results.
The RX power protection technology is particularly valuable because it works against common mode (ground) as well as normal mode (line to neutral) events.
While it protects against dramatic surge events of 6,000 volts at 3,000 amps on hot and neutral, it also limits ground line surges to one-half (0.50) volt to prevent operating faults in digital processing equipment such as DSPs.
Power protection circuitry in the iP 1515-RX includes a differential transformer, lots of filtering capacitance and control circuitry providing protection from dangerous surges, high frequency interference, building wiring faults and over voltage. RX technology is proven to deliver protection comparable to an isolation transformer.
In addition to guarding against dangerous voltage surges, this unit reduces high frequency common and normal mode noise by up to 70 dB in a range up to 30 MHz.
FAIL-SAFE CONTROL
This power module features three levels of on and off control, to provide fail safe operation in the event of a system or network malfunction.
The iP 1515-RX has a switch on the front of the chassis which can be used to sequence on or off all switched outlets if there is a data network failure.
Should there be an internal processor fault, the Manual Override switch, also on the front of the chassis, can turn the unit on, as well.
This product can be accessed via internet or intranet communications using Ethernet or RS232 connection so that individual AC receptacles can be turned on and off and monitored for electrical current flow.
The iP 1515-RX provides local, intranet or Internet based power control to six receptacles grouped into three individual Power Pods.
Each of these Pods can be turned on and off individually. In addition, current draw can be monitored from 0.2 to 20.0 amps per power POD.
FEATURES AND FUNCTIONS
The iP 1515-RX features high quality design, proven power protection and the most important features needed for AC power control and monitoring.
Local, intranet and Internet power control
Local fail safe sequencing and manual override
On-board web server for easy set up, control, sequencing and monitoring
Front panel indicators for network connection and outlets on
Amperage monitoring from 0.20 to 20.0 amps per power POD
Administrator and User login options
Automatic Power Cycle to reboot a network data router if network connection is lost
Available Crestron control module
Ten volt maximum line to neutral voltage surge
One half volt maximum ground line voltage surge
Transient Energy Absorption of 1,020 Joules
AC line filtration of 60 DB to 80 DB @ 30 MHz
Using third party programs the iP 1515-RX can be scheduled to turn on and off at specific times.
Also, its outlets can be sequenced on and off if required for application in audio systems.
This remote control can also be used to reboot DSPs or other processor based electronics as well as to save energy costs by scheduling electronic equipment to turn off when not in use.
WEB SERVER
All iP Series products have an on board web server that provides graphic user interface for controlling and monitoring equipment connected to the iP Series unit.
This feature is available for remote use as soon as the IP address of the unit is entered in a web browser.
TCP / IP CONTROL
It is possible to control and monitor iP-1515-RX over Ethernet using raw TCP protocol.
In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP-1515-RX over a TCP/IP connection using a suitable TCP/IP client program.
Once the connection is made, the console commands are available to the user over TCP/IP as if the user was connected to IP-1515-RX over the local serial connection.
RS232 CONTROL
The RJ11 style connector on the back of the iP1515-RX chassis (labeled "RS232") can be used for remote control of this unit via RS232 protocol over distances of no more than 50 feet. Commands for this control are detailed in the iP 1520-RX Manual in the section titled "RS232 Control and Monitoring".
Operation and status of the iP 1515-RX and connected equipment can be observed in several ways.
Each of three lights on the front of the iP 1515-RX turn on to indicate which of the three Power Pods have been turned on.
A fourth LED indicates power on and active data network communications.
By way of the on board web server or an appropriate third party interface, each of the three Power Pods can be monitored to determine if connected equipment is on and consuming power.
SNMP
Juice Goose developed an SNMP enabled subset of the iP Series products. Those models can be addressed with SNMP or RS232 protocol but lack some of the features of the standard iP Series models.
For additional information, click here.
POWER CONDITIONING
The iP 1515-RX provides best of breed AC line protection and filtration across hot, neutral and ground.
Published test results prove the effectiveness of the power protection circuitry contained in the iP 1515-RX and other RX Series products. Click here for test results.
The RX power protection technology is particularly valuable because it works against common mode (ground) as well as normal mode (line to neutral) events.
While it protects against dramatic surge events of 6,000 volts at 3,000 amps on hot and neutral, it also limits ground line surges to one-half (0.50) volt to prevent operating faults in digital processing equipment such as DSPs.
Power protection circuitry in the iP 1515-RX includes a differential transformer, lots of filtering capacitance and control circuitry providing protection from dangerous surges, high frequency interference, building wiring faults and over voltage. RX technology is proven to deliver protection comparable to an isolation transformer.
In addition to guarding against dangerous voltage surges, this unit reduces high frequency common and normal mode noise by up to 70 dB in a range up to 30 MHz.
FAIL-SAFE CONTROL
This power module features three levels of on and off control, to provide fail safe operation in the event of a system or network malfunction.
The iP 1515-RX has a switch on the front of the chassis which can be used to sequence on or off all switched outlets if there is a data network failure.
Should there be an internal processor fault, the Manual Override switch, also on the front of the chassis, can turn the unit on, as well.
GENERAL DESCRIPTION
The Juice Goose iP1515 and 1520 are economical micro controller based power distribution devices that can be accessed via Internet or intranet communications using HTML, TCP/IP or RS232 connection. With this remote access, individual AC receptacles can be turned on and off and monitored for electrical current flow. The iP1515 has a fifteen amp capacity. The iP1520 has a twenty amp capacity. Both provide AC line surge protection.
FEATURES
These products are economically priced relative to comparable Ethernet addressable power modules. Yet they feature high quality design and construction as well as the most important functions needed for web based remote control. Each has a 15 amp or 20 amp circuit breaker and power cord for an effective 12 amp or 16 amp current rating. They can be used to sequence audio equipment on and off, reduce energy consumption by scheduling equipment to be on only when needed, or remote reboot DSPs or other processor based electronics. The Power Cycle feature can be used to automatically reboot a network data router if network communication is lost. Each duplex can be individually controlled to turn on and off. And each is individually metered to report current flow. The front of the chassis includes status LEDs and override switches that allow local monitoring and control.
COMMUNICATION AND CONTROL
All the functions of the iP 15 Series can be accessed through Ethernet or RS232 ports on the back of the chassis. An on-board web server gives the product immediate Internet functionality through a graphic interface that can be accessed via a web browser. Or the iP 15 can be controlled through RS232 commands using a terminal program or a third party control system. Interface links have been developed by Crestron, Extron and Symetrix.
SNMP COMMUNICATIONS
iP1515-SNMP and iP1520-SNMP are available with an SNMP command platform. Those units do not feature current monitoring capability or communications via HTML, UDP or TCP.
MONITORING
The iP1515 and 1520 allow local and remote monitoring of the operating status of the unit and of connected equipment. The front of the chassis features a white LED that indicates connection to a data network. This light stays on during active network connection and blinks in the event of Ethernet communications failure or RS232 connection. In addition, lighting each of three green LEDs on the front of the chassis indicates a corresponding Power Pod receptacle has been turned on.
This unit can also be remote monitored via the same TCP/IP or RS232 connection used to control it. Current metering on each of the Power Pods reports amperage levels from 0.20 to 20.0 amps and can be accessed through the on-board web server or via raw TCP, UDP or RS232 protocol.
FAIL SAFE OVERRIDES
These products feature three levels of on and off control to provide fail safe operation in the event of system or unit malfunction. First, the iP 15 Series can be remote controlled via Ethernet or RS232 communication links. Second, in the event of network connection failure the switch on the front left of the chassis becomes operational and can be used to turn on the three switched Power Pods in a sequenced fashion. Lastly, in the event of a failure of the internal control circuitry the Manual Override switch of the front of the chassis will cause a hardwired turn on of all switched receptacles.
REPLACEABLE SURGE PROTECTION
The iP1515 and 1520 feature triple AC line surge protection across hot and neutral with no ground line contamination. The replaceable surge protection module includes an indicator on the front panel showing if the module needs to be replaced.
DETAIL SPECIFICATIONS
Chassis: 16 gauge steel with 11 gauge rack mount brackets
Dimensions: 1.75”H x19”W x 7”D
Weight: 10 lb.
Circuit Breaker: 15A (iP 1515) or 20A (iP 1520) thermal on back of the chassis
Technical Current Rating: 12A (iP1515) or 16A (iP1520)
Number of Addressable Power Pods: Three
Power Input: Seven foot power cord with NEMA 5/15P (iP1515) or NEMA 5/20P (iP1520) (NOTE: iP1520 requires a 5/20R receptacle)
Power Output: Six switched NEMA 5/15R (iP1515) or 5/20R (iP1520), plus one unswitched
NEMA 5/15R (iP1515) or 5/20R (iP1520)
Input Voltage: 120 VAC @ 60 Hz
Signal Connections: Ethernet (RJ-45) RS 232 (RJ-11)
Network Protocol: HTML, TCP, UDP, RS232, SNMP (special model)
Monitor Features: Local and remote, network connection and current level
Current level monitoring is not available on SNMP models
Operating Temperature Range: -10C to +40C
The Juice Goose iP1515 and 1520 are economical micro controller based power distribution devices that can be accessed via Internet or intranet communications using HTML, TCP/IP or RS232 connection. With this remote access, individual AC receptacles can be turned on and off and monitored for electrical current flow. The iP1515 has a fifteen amp capacity. The iP1520 has a twenty amp capacity. Both provide AC line surge protection.
FEATURES
These products are economically priced relative to comparable Ethernet addressable power modules. Yet they feature high quality design and construction as well as the most important functions needed for web based remote control. Each has a 15 amp or 20 amp circuit breaker and power cord for an effective 12 amp or 16 amp current rating. They can be used to sequence audio equipment on and off, reduce energy consumption by scheduling equipment to be on only when needed, or remote reboot DSPs or other processor based electronics. The Power Cycle feature can be used to automatically reboot a network data router if network communication is lost. Each duplex can be individually controlled to turn on and off. And each is individually metered to report current flow. The front of the chassis includes status LEDs and override switches that allow local monitoring and control.
COMMUNICATION AND CONTROL
All the functions of the iP 15 Series can be accessed through Ethernet or RS232 ports on the back of the chassis. An on-board web server gives the product immediate Internet functionality through a graphic interface that can be accessed via a web browser. Or the iP 15 can be controlled through RS232 commands using a terminal program or a third party control system. Interface links have been developed by Crestron, Extron and Symetrix.
SNMP COMMUNICATIONS
iP1515-SNMP and iP1520-SNMP are available with an SNMP command platform. Those units do not feature current monitoring capability or communications via HTML, UDP or TCP.
MONITORING
The iP1515 and 1520 allow local and remote monitoring of the operating status of the unit and of connected equipment. The front of the chassis features a white LED that indicates connection to a data network. This light stays on during active network connection and blinks in the event of Ethernet communications failure or RS232 connection. In addition, lighting each of three green LEDs on the front of the chassis indicates a corresponding Power Pod receptacle has been turned on.
This unit can also be remote monitored via the same TCP/IP or RS232 connection used to control it. Current metering on each of the Power Pods reports amperage levels from 0.20 to 20.0 amps and can be accessed through the on-board web server or via raw TCP, UDP or RS232 protocol.
FAIL SAFE OVERRIDES
These products feature three levels of on and off control to provide fail safe operation in the event of system or unit malfunction. First, the iP 15 Series can be remote controlled via Ethernet or RS232 communication links. Second, in the event of network connection failure the switch on the front left of the chassis becomes operational and can be used to turn on the three switched Power Pods in a sequenced fashion. Lastly, in the event of a failure of the internal control circuitry the Manual Override switch of the front of the chassis will cause a hardwired turn on of all switched receptacles.
REPLACEABLE SURGE PROTECTION
The iP1515 and 1520 feature triple AC line surge protection across hot and neutral with no ground line contamination. The replaceable surge protection module includes an indicator on the front panel showing if the module needs to be replaced.
DETAIL SPECIFICATIONS
Chassis: 16 gauge steel with 11 gauge rack mount brackets
Dimensions: 1.75”H x19”W x 7”D
Weight: 10 lb.
Circuit Breaker: 15A (iP 1515) or 20A (iP 1520) thermal on back of the chassis
Technical Current Rating: 12A (iP1515) or 16A (iP1520)
Number of Addressable Power Pods: Three
Power Input: Seven foot power cord with NEMA 5/15P (iP1515) or NEMA 5/20P (iP1520) (NOTE: iP1520 requires a 5/20R receptacle)
Power Output: Six switched NEMA 5/15R (iP1515) or 5/20R (iP1520), plus one unswitched
NEMA 5/15R (iP1515) or 5/20R (iP1520)
Input Voltage: 120 VAC @ 60 Hz
Signal Connections: Ethernet (RJ-45) RS 232 (RJ-11)
Network Protocol: HTML, TCP, UDP, RS232, SNMP (special model)
Monitor Features: Local and remote, network connection and current level
Current level monitoring is not available on SNMP models
Operating Temperature Range: -10C to +40C
| Weight | 11.000000 |
|---|---|
| Length | 23 |
| Width | 12 |
| Height | 4 |
| Color | Black |
| Manufacturer | Juice Goose |
| Manufacturer Part Number | iP-1515-RX |
| UPC | 85256000085 9 |
| Size | 15 Amps |
Write Your Own Review