The white-finished version of U853PMU, the U853PMWU UniLine condenser hanging microphone features Audio-Technica’s UniLine line-cardioid element and comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone is equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Its 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise.
FEATURES
• Designed for suspension over choirs, instrumental groups and theater stages
• Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
• UniLine polar pattern provides narrow 90° acceptance angle
• Superior off-axis rejection for maximum gain before feedback
• UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Low-profile design with low-reflectance finish for minimum visibility
SPECIFICATIONS
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll-off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: –35 dB (17.7 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 124 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 102 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 4 mA typical
Switches: Flat, roll-off; 0 dB/+10 dB gain setting
Weight: (Microphone) 1.1 oz (30 g)
Weight: (Power Module) 3.4 oz (97 g)
Dimensions: (Microphone) 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameter
Dimensions: (Power Module) 2.80" (71.0 mm) W x
4.55" (115.5 mm) H x
1.42" (36.0 mm) D
Output Connector: (Power Module) Screw terminals
Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Optional Interchangeable Elements: UE-C cardioid (120°); UE-H hypercardioid (100°); UE-O omnidirectional (360°)
Accessories Furnished: AT8154(WH) two-stage foam windscreen; AT8451(WH) steel hanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter
Audio-Technica Case Style: M32
Validate your login